FAQs & Troubleshooting
 |
Popular |
301 Results
- 1Downloading Optional Design Pattern Collection
- 2Mat and Material Combinations
- 3The machine is turned off (Auto Shut Down).
- 4How to Calibrate the LCD Touchscreen Display
- 5Mat and Cutting Blade Combinations
- 6"Please register your machine." appears on the computer screen.
- 7Replacement Criteria
- 8E02005 appears on the computer screen.
- 9List of Error Messages for CanvasWorkspace (E##### / N#####)
- 10Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 11ErrS52 appears on the computer screen.
- 12Cutting/Drawing by Tracing an Image
- 13How to create an account for CanvasWorkspace
- 14I adjust the blade extension and the cut pressure to the setting described in the Quick Reference Guide. But the result of cutting the material was not good.
- 15How do I Scan for Cutting (Direct Cut) ?
- 16How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 17Can I create the cutting data for ScanNCut from vector graphics data?
- 18List of Error Messages for CanvasWorkspace (Others)
- 19How do I recall a saved data from the machine's memory or USB flash drive?
- 20Adjusting the Blade Extension
- 21The machine stopped while an operation is being performed.
- 22The mat is fed in at an angle and is not fed during cutting / drawing.
- 23When the mat is inserted, the attached material peels off.
- 24How to register Your Machine with CanvasWorkspace
- 25Care and Maintenance (Cleaning the Mat)
- 26Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®
- 27“The entered text cannot be used.“ appears on the computer screen.
- 28ErrS99 appears on the computer screen.
- 29ErrS24 appears on the computer screen.
- 30ErrS08 appears on the computer screen.
- 31If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 32E10003 appears on the computer screen.
- 33E00009 appears on the computer screen.
- 34E00003 appears on the computer screen.
- 35Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 36About Blade Extension, Cutting Pressure and Mat
- 37What is the maximum area that the machine can scan?
- 38What type of data can my ScanNCut machine be used?
- 39Attaching & Peeling Off the Material
- 40There are deep cuts completely through the mat.
- 41What accessory kits are available?
- 42"This pattern cannot be used." appears on the LCD display screen.
- 43E11001 appears on the computer screen.
- 44What should I do if part of the material is not cut?
- 45"The mat cannot be recognized. The mat will unload." message appearing on the LCD. What does it mean?
- 46"Character string is too long for the mat." message appearing on the LCD. What does it mean?
- 47ErrS12 appears on the computer screen.
- 48ErrS07 appears on the computer screen.
- 49ErrS02 appears on the computer screen.
- 50The Pattern for Paper Piercing or The Paper Piercing Menu Is Not Displayed.
