CM260
 |
FAQs & Troubleshooting |
16 Results
Sort by
- 126/12/2018If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 210/07/2017Mat and Material Combinations
- 310/07/2017Mat and Cutting Blade Combinations
- 410/07/2017The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 510/07/2017The mat is fed in at an angle and is not fed during cutting / drawing.
- 610/07/2017The mat or the material catches on a feed roller during cutting/drawing.
- 710/07/2017When the mat is inserted, the attached material peels off.
- 810/07/2017The material to be cut/drawn or original to be scanned cannot be attached to the mat.
- 922/10/2015The 12" × 24" (305 mm × 610 mm) mat cannot be used with scanning function.
- 1019/08/2015There are deep cuts completely through the mat.
- 1131/07/2015The mat cannot be fed.
- 1231/07/2015The mat cannot be recognized.
- 1322/01/2014The mat cannot be inserted.
- 1428/11/2013The mat or the material catches on a feed roller when the mat is being inserted.
- 1528/11/2013The mat cannot be fed out.
- 1628/11/2013The mat is fed in at an angle.
