FAQs & Troubleshooting
![]() |
Popular |
94 Results
- 1Maintenance (Clean the hook) [ Video ]
- 2Maintenance (Cleaning the bobbin case) [ Video ]
- 3How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 4How to set up the cap frame driver. [Video instructions]
- 5How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 6How to use the Round frame (PRPRFK1) [Video instructions]
- 7How to Embroider on Bag. [Video instructions]
- 8How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 9How to use the the versatile magnetic frame [Video instructions]
- 10How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 11How to Embroider on Clothes. [Video instructions]
- 12How to Embroider on Shoes. [Video instructions]
- 13Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 14How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 15"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 16How to set up the cap frame. [Video instructions]
- 17How to Embroider on Pet Collar. [Video instructions]
- 18How to Embroider on Cap. [Video instructions]
- 19Maintenance (Oiling the machine) [ Video ]
- 20Maintenance (Cleaning around the needle plate) [ Video ]
- 21How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 22Fabric and Thread
- 23"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 24Maintenance (Cleaning the thread paths of the upper threads)
- 25"Transmitting by USB" message appears on the LCD. What does it mean?
- 26"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 27When thread got tangled
- 28Embroidery
- 29"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean?
- 30"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 31"Trimming sensor error." message appears on the LCD. What does it mean?
- 32"OK to delete the selected picture?" message appears on the LCD. What does it mean?
- 33How do I create a space between characters?
- 34"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean?
- 35"USB media error" message appears on the LCD. What does it mean?
- 36"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 37There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 38"Please UNLOCK to use the Thead Trimmer." message appears on the LCD. What does it mean?
- 39"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 40"Please set up the "Thread antenna"" message appears on the LCD. What does it mean?
- 41"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 42"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 43"Check upper and bobbin thread." message appears on the LCD. What does it mean?
- 44"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 45How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 46How do I change the volume of operation sounds or alarm sounds?
- 47Maintenance (Oiling the machine)
- 48Maintenance (Cleaning the bobbin case)
- 49Maintenance (Cleaning around the needle plate)
- 50"Needle bar case home position error." message appears on the LCD. What does it mean?