FAQs & Troubleshooting
Popular |
94 Results
- 1How to Embroider on Cap. [Video instructions]
- 2How to Embroider on Bag. [Video instructions]
- 3There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 4How to use the the versatile magnetic frame [Video instructions]
- 5How to set up the cap frame. [Video instructions]
- 6Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 7How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 8How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 9How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 10How to set up the cap frame driver. [Video instructions]
- 11How to Embroider on Clothes. [Video instructions]
- 12Maintenance (Cleaning the bobbin case) [ Video ]
- 13Maintenance (Clean the hook) [ Video ]
- 14How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 15How to use the Round frame (PRPRFK1) [Video instructions]
- 16How to Embroider on Shoes. [Video instructions]
- 17Embroidery
- 18Maintenance (Oiling the machine) [ Video ]
- 19Fabric and Thread
- 20How to assemble the Dedicated Stand. (Optional accessory : PRNSTD) [Video instructions]
- 21Maintenance (Cleaning around the needle plate) [ Video ]
- 22How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 23How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 24How to Embroider on Pet Collar. [Video instructions]
- 25"Can't use this key during camera mode." message appears on the LCD. What does it mean?
- 26"Please make sure the PC is connected to the machine via the USB cable to run the Link application." message appears on the LCD. What does it mean?
- 27Maintenance (Cleaning the thread paths of the upper threads)
- 28"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 29"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 30"Please go to either Embroidering Screen or Embroidering Settings Screen to use the Thread Trimmer." message appears on the LCD. What does it mean?
- 31"Cannot communicate between PC and machine. Please check the USB cable connections to run the Link application." message appears on the LCD. What does it mean?
- 32"Needle threader is in threading position." message appears on the LCD. What does it mean?
- 33"Needle threader error" message appears on the LCD. What does it mean?
- 34How do I install the bobbin wound with thread?
- 35Fabric/stabilizer compatibility chart
- 36Stabilizers (Backing)
- 37"Remove the embroidery positioning mark." message appears on the LCD. What does it mean?
- 38"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 39"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 40"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 41"OK to cancel embroidering?" message appears on the LCD. What does it mean?
- 42"Check upper and bobbin thread." message appears on the LCD. What does it mean?
- 43Maintenance (Cleaning the bobbin case)
- 44Maintenance (Cleaning around the needle plate)
- 45Maintenance (Clean the hook)
- 46How do I thread the machine? (Threading the upper thread)
- 47Hooping the Fabric
- 48"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 49"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 50"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?