FAQs & Troubleshooting
 |
Popular |
34 Results
- 1How does the "FAX/TEL" Mode work?
- 2What does the pseudo-ring (double ring) indicate in the F/T Mode?
- 3How do I improve the copy or fax quality?
- 4How do I print the received faxes that are stored in memory? (Message Store)
- 5I have an external telephone answering device on the same line as my FAX and have the answer mode on my FAX set for TAD mode. How do I know if an incoming call is a telephone (voice) call or a fax?
- 6How do I set up an answering machine (TAD) to work on the same line as the fax?
- 7How can I clear the "PAPER JAM" error message?
- 8How do I know which receive mode to select?
- 9Can I confirm that the FAX was sent correctly?
- 10Can I reduce the size of a received fax on this machine?
- 11When scanning a document to be copied or faxed, the LCD shows "OUT OF MEMORY". What should I do?
- 12My FAX/MFC will not Dial. Why?
- 13"UNABLE TO..." or "MEMORY DISABLED" message appearing on the LCD. What does it mean and how do I clear it?
- 14What does "NG" on the Transmission Verification Report mean?
- 15Vertical streaks appear in my copies.
- 16Do I need a telephone line to send and receive faxes with my Brother machine?
- 17Can I print from or scan to Android™ Smartphone?
- 18Can I print from and scan to iPhone, iPod touch and iPad?
- 19My Brother machine has no power.
- 20How to clear "PRINTHEAD OVERHEATED WAIT TO COOL" Error?
- 21I have my FAX machine set in the FAX/TEL (F/T) answer mode. What happens if I do not answer the telephone and it's a non fax call?
- 22What does it mean if the fax machine rings its pseudo-ring/ double-ring (F/T RING TIME) and there is not a voice call?
- 23Can I print a report that will show a listing of faxes I sent and received?
- 24When receiving a 1 page fax, why does the fax print on 2 pages or a blank sheet ejects afterwards?
- 25Why are my sent faxes always received with a black vertical line down the page?
- 26The error message "No Supported Devices Found" appears on the Brother iPrint&Scan (mobile device).
- 27Whenever anyone attempts to leave a message, all they hear are funny sounds and eventually a high pitched squeal. Why is this happening?
- 28I have a telephone answering device (TAD) on the same line as my FAX. Is necessary to record a 5 second pause before my outgoing message begins?
- 29Can an External Answering Device(TAD) be used instead of the built-in one?
- 30How do I replace the ribbon? (Ribbon Empty -Reset or Replace)
- 31Why can't I copy or send? All the keys just beep 3 times.
- 32Can I connect my External Answering Device in another room and still receive faxes?
- 33I am experiencing problems sending a fax, what can I do?
- 34How do I program the date and time?
