FAQs & Troubleshooting
![]() |
Popular |
54 Results
- 1Why doesn't the machine answer when receiving a call?
- 2The error message "No Supported Devices Found" appears on the Brother iPrint&Scan (mobile device).
- 3How do I adjust the settings of the ring volume, beeper volume and speaker volume on my Brother machine?
- 4Can I print from or scan to Android™ Smartphone?
- 5Can I use non-Brother or third party supplies with the Brother machine?
- 6What does "COMM.ERROR" on the LCD display mean?
- 7What is the difference between the toner cartridge and the drum unit?
- 8Can I print from and scan to iPhone, iPod touch and iPad?
- 9Can I confirm that the FAX was sent correctly?
- 10I am experiencing problems receiving faxes. What can I do?
- 11Change or delete a Group stored at a One Touch/Speed Dial.
- 12Make copies using my Brother machine.
- 13I still see the "Toner Empty" message on the LCD even after replacing the toner cartridge.
- 14Can I reduce the size of a received fax on this machine?
- 15How do I clear the "Awaiting Redial" error?
- 16What can happen if the wrong paper is used in your machine.
- 17Adjust my Brother machine's Sleep Mode setting.
- 18Can I buy any MICR toner?
- 19I heard a beep sound from the UPS (Uninterruptible Power Supply) when I turned on my Brother machine.
- 20Scan a fax into my Brother machine while it is sending a fax from memory, receiving a fax, or printing a document from my computer.
- 21The keys on the control panel do not respond.
- 22How do I program the date and time?
- 23Replace the toner cartridge.
- 24Can I send a fax without scanning the documents into memory?
- 25I can receive a fax, but cannot receive a telephone call.
- 26I am experiencing problems sending a fax, what can I do?
- 27My FAX/MFC will not Dial. Why?
- 28How do I send a fax to multiple fax numbers? (Broadcasting)
- 29Set up a Group for Broadcasting faxes.
- 30How can I clear the "PLS OPEN COVER" error message on LCD?
- 31Replace the drum unit.
- 32Stop my Brother machine from automatically redialing a busy number.
- 33Do I need a telephone line to send and receive faxes with my Brother machine?
- 34The paper is skewed when it's printed.
- 35I am using Voice Over Internet Protocol (VoIP) and cannot send and/or receive faxes. What can I do?
- 36The machine has counters but how do I access these counters and what do they mean?
- 37How can I clear the "PAPER JAM" or "PRINTER JAM" error message?
- 38How do I print the received faxes that are stored in memory? (Fax Storage)
- 39Why does the LCD of my machine display "CHANGE DRUM SOON"?
- 40Why does the display read "Cover Open"?
- 41What does "NG" or "ERROR" on the Transmission Verification Report mean?
- 42Why are my sent faxes always received with a black vertical line down the page?
- 43My Brother machine has no power.
- 44My Brother machine misfeeds paper.
- 45How do I know which receive mode to select?
- 46How do I clean the Scanner to improve the copy or fax quality?
- 47When receiving a 1 page fax, why does the fax print on 2 pages or a blank sheet ejects afterwards?
- 48When scanning a document to be copied or faxed, the LCD shows "OUT OF MEMORY". What should I do?
- 49What does "MACHINE ERROR XX" mean?
- 50Where is the full User's Guide? I can't find enough information in the paper manual.