I am experiencing problems sending a fax, what can I do?

Replace the drum unit.

ControlCenter3 displays a blank screen at startup (Windows)

Delete the faxes stored in my Brother machine's memory.

The error message "No Supported Devices Found" appears on the Brother iPrint&Scan (mobile device).

What is the difference between the toner cartridge and the drum unit?

Can I print from or scan to Android™ Smartphone?

Can I print from and scan to iPhone, iPod touch and iPad?

Is my Brother machine compatible with third party print servers?

Recently, when I print a document from the manual feed slot, my Brother machine is taking more time than usual to start feeding paper. How can I reduce the time it takes to start feeding paper?

What can happen if the wrong paper is used in your machine.

Change the quality of the faxes I send (Fax Resolution).

Set the Brother machine to prevent public access to certain features.

How can I prevent public users from changing the settings of my Brother machine?

Why doesn't my Brother machine have a dial tone?

I'm using Voice Over Internet Protocol (VoIP) and am having problems sending faxes. 

How do I set up a group for broadcasting faxes?

"Paper Jam Inside" error appears on the LCD. What should I do?

"Paper Jam Rear" error appears on the LCD. What should I do?

"Paper Jam Tray" error appears on the LCD. What should I do?

When scanning a document to be copied, the LCD shows "OUT OF MEMORY". What should I do?

I'm using Voice Over Internet Protocol (VoIP) and am having problems receiving faxes.

The back cover is securely closed, however the message "Back Cover Open" is displayed on the LCD. How do I clear this message?

How do I set up an answering machine (TAD) to work on the same line as my Brother machine?

How do I check if the FAX/MFC has faxes in its memory when it has a mechanical problem?

How can I clear the "Drum Error" or the "Dust on Drum" error message on the LCD?

How do I clean white or black spots on printed documents?

How can I forward a fax to another fax machine when the FAX/MFC has a mechanical problem?

"Unable to..." message appearing on the LCD. What does it mean and how do I clear it?

Why doesn't the machine answer when receiving a call?

My FAX/MFC will not Dial. Why?

What is the "Station ID" and how do I set it?

How can I improve the copy quality?

How do I clear vertical lines or streaks that appear in the copies I made?

Verify if the Brother machine has a dial tone

How do I clear the "Awaiting Redial" message?

I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner Life End" or the Toner LED is still on or flashing.

The keys on the control panel do not respond.

When receiving a single page fax, why does the fax print on two pages or a blank sheet ejects afterwards?

My Brother machine has no power.

Document Jam

What does "NG" or "ERROR" on the Transmission Verification Report mean?

Print a report that will show a listing of faxes I sent and received

I still receive the error message "Change Drum Soon" after I replace the drum unit with a new one.

Change Drum Soon

Replace the toner cartridge

Send a fax

How can I program my Brother machine's electronic cover page?

I heard a beep sound from the UPS (Uninterruptible Power Supply) when I turned on my Brother machine.