FAQs & Troubleshooting
Popular |
44 Results
- 1Why doesn't the machine answer when receiving a call?
- 2Can I use voice mail on the same line as my Brother machine?
- 3Can I reduce the size of a received fax to fit the size of the paper in the Brother machine?
- 4The error message "No Supported Devices Found" appears on the Brother iPrint&Scan (mobile device).
- 5How do I store received faxes into memory? (Fax Storage)
- 6Can I print from and scan to iPhone, iPod touch and iPad?
- 7What is Distinctive Ring and how do I program it?
- 8Verify if the Brother machine has a dial tone
- 9Can I print from or scan to Android™ Smartphone?
- 10Can I program my Brother machine to forward the faxes I receive to another location?
- 11I cannot pull the paper tray out of my machine. What can I do?
- 12How do I clean the Scanner to improve the copy or fax quality?
- 13Can I confirm that the FAX was sent correctly?
- 14Why doesn't my Brother machine have a dial tone?
- 15How do I adjust the settings of the ring volume, beeper volume and speaker volume on my Brother machine?
- 16Can third party ink be used to refill the ink cartridges?
- 17Why is it necessary for my machine to go through regular cleaning cycles?
- 18Why does my machine's LCD show "NO CARTRIDGE" even though I have already installed the ink cartridge?
- 19How do I replace the Ink Cartridge?
- 20When receiving a single page fax, why does the fax print on two pages or a blank sheet ejects afterwards?
- 21The LCD displays an error code (number). What does it mean?
- 22Can I still receive faxes or calls when the machine is switched off?
- 23Where can I find my Brother machine's serial number?
- 24Improve poor print quality.
- 25When scanning a document to be copied or faxed, the message "OUT OF MEMORY" appears on the display. What can I do?
- 26I replaced my ink cartridge, but the LCD is still displaying "Ink Empty Black". What can I do?
- 27What does "NG" or "ERROR" on the Transmission Verification Report mean?
- 28What does "COMM.ERROR" on the LCD display mean?
- 29What is the "Station ID" and how do I set it?
- 30I can receive a fax, but cannot receive a telephone call.
- 31My machine does regular cleaning cycles in the night. How can I correct this?
- 32How do I clear the message "Wrong Paper Size" from the display?
- 33The keys on the control panel do not respond.
- 34Set the date and time
- 35Why are the faxes I send always received with a black vertical line down the page?
- 36How do I clear the message "Awaiting Redial"?
- 37The LCD message "Standing by ON/OFF to resume " is displayed on my Brother machine.
- 38Do I need a telephone line to send and receive faxes with my Brother machine?
- 39The monochrome copies I make are too light. What can I do?
- 40I am using Voice Over Internet Protocol (VoIP) and cannot send and/or receive faxes. What can I do?
- 41Set up an answering machine (TAD) to work on the same line as the Brother machine.
- 42When I print, the pages are smudged with ink. What should I do?
- 43How do I clear the message "PAPER JAM" or "PRINTER JAM" from the display?
- 44How do I clear the message "INK EMPTY BLACK" from the display?