FAQs & Troubleshooting
![]() |
Popular |
120 Results
- 51The bobbin thread cannot be pulled up.
- 52Tutorial videos on how to use the machine [Video instructions]
- 53How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 54"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 55"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 56Fabric is caught in the machine and cannot be removed
- 57For better results when sewing stretch fabrics
- 58"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 59How do I remove or attach the Embroidery foot ?
- 60"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 61How do I attach or remove the embroidery frame ?
- 62How do I remove or attach the presser foot ?
- 63How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 64"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 65"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 66How do I clean the race?
- 67"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 68When the thread became tangled under the bobbin winder seat
- 69How do I thread the machine (Threading the upper thread)?
- 70"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
- 71"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 72"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 73How do I save the embroidery patterns in the machine’s memory?
- 74Tangled thread on wrong side of fabric
- 75Incorrect thread tension
- 76How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 77How do I attach or remove the Embroidery Unit?
- 78How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 79How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 80How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 81How do I pull up the bobbin thread?
- 82How do I wind the bobbin?
- 83"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 84"This pattern cannot be used." message appears on the LCD. What does it mean?
- 85"Preventive maintenance is recommended" appears on the LCD.
- 86Embroidery
- 87"This pattern cannot be loaded as the pattern extends out of the editable area." message appears on the LCD. What does it mean?
- 88"Not enough available memory to save." message appears on the LCD. What does it mean?
- 89"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
- 90Upper thread tightened up
- 91"Turn off the power and replace the needle plate." appears on the LCD.
- 92"This USB media cannot be used." message appears on the LCD. What does it mean?
- 93"Lower the buttonhole lever." message appears on the LCD. What does it mean and how do I clear it?
- 94"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 95How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 96How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 97"F**" appears on the LCD. What does it mean?
- 98"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 99"Selected pattern field extends to the outside of the embroidery frame." message appears on the LCD. What does it mean?
- 100"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?