Innov-is 500D
 |
FAQs & Troubleshooting |
30 Results
Sort by
- 131/03/2016"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 231/03/2016"Saving..." message appearing on the LCD. What does it mean?
- 331/03/2016"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 431/03/2016"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 531/03/2016"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 631/03/2016"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 731/03/2016"Finish editing the pattern before sewing the pattern." message appearing on the LCD. What does it mean?
- 831/03/2016"Data volume is too large for this pattern." message appearing on the LCD. What does it mean?
- 931/03/2016"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 1031/03/2016"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 1131/03/2016"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 1231/03/2016"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 1314/05/2015"Selected a pattern." appears on the LCD.
- 1414/05/2015"Twin needles can not be used for this pattern." appears on the LCD.
- 1514/05/2015"Change to the single needle mode." appears on the LCD.
- 1607/04/2009"Lower the presser foot lever." appears on the LCD.
- 1707/04/2009"Lower the buttonhole lever." appears on the LCD.
- 1807/04/2009"Lift the buttonhole lever." appears on the LCD.
- 1907/04/2009"The safety device has been activated." appears on the LCD.
- 2026/02/2009"Disconnect the foot control." appears on the LCD.
- 2101/04/2008"Saved on another embroidery card." appears on the LCD.
- 2201/04/2008"Saved on an embroidery card." appears on the LCD.
- 2301/04/2008"Turn off the power and insert an embroidery card." appears on the LCD.
- 2401/04/2008"Calculating the time required... Please wait." appears on the LCD.
- 2531/03/2008"This embroidery pattern can not be used on this machine." appears on the LCD.
- 2631/03/2008"No more stitches can be combined." appears on the LCD.
- 2731/03/2008"Delete the selected pattern." appears on the LCD.
- 2831/03/2008"Press the back key to return to the screen to sew." appears on the LCD.
- 2913/11/2007"Press needle position button to raise needle." appears on the LCD.
- 3003/08/2006"Insert thread cassette." message appearing on the LCD. What does it mean?
