FAQs & Troubleshooting
Popular |
74 Results
- 1When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 2"Retrieving the pattern. Wait a moment." message appearing on the LCD. What does it mean?
- 3"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 4"Finish editing the pattern before sewing the pattern." message appearing on the LCD. What does it mean?
- 5Why does the lower thread keep breaking?
- 6Fabric and Thread
- 7Where do I put the oil in my machine?
- 8How do I wind the bobbin?
- 9"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 10"Data volume is too large for this pattern." message appearing on the LCD. What does it mean?
- 11"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 12The thread tension is incorrect.
- 13Embroidery
- 14Place a spool of thread on a spool pin.
- 15How do I thread the twin needle?
- 16When can we use Standard GREEN Marked Bobbin Case?
- 17When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 18"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
- 19"Deleting..." message appearing on the LCD. What does it mean?
- 20"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 21"OK to save the current settings?" message appearing on the LCD. What does it mean?
- 22"Disconnect the foot controller." message appearing on the LCD. What does it mean?
- 23"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
- 24"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 25"This embroidery pattern can not be used on this machine." message appearing on the LCD. What does it mean?
- 26"No more stitches can be combined." message appearing on the LCD. What does it mean?
- 27"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 28"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 29How do I raise or lower the feed dogs?
- 30How do I select patterns from the embroidery cards (sold separately)?
- 31Fabrics and stabilizer material for embroidery
- 32How do I correctly install a bobbin?
- 33F** or "F*" appears on the LCD. What does it mean?
- 34For better results when sewing stretch fabrics
- 35How do I retrieve a specific embroidery pattern from the computer to the machine via a USB media?
- 36How do I save often-used patterns in the machine's memory?
- 37How do I manually thread the needle?
- 38Upper Threading (Threading the upper thread)
- 39"Lower the presser foot lever." appears on the LCD.
- 40With free-motion quilting, skipped stitches or needle breakage occur
- 41It is difficult to pass the thread through the needle bar thread guide(hook).
- 42How do I create a space between characters?
- 43"This key does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 44"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 45"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 46"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 47"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 48"Saving..." message appearing on the LCD. What does it mean?
- 49"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 50"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?