FAQs & Troubleshooting
![]() |
Popular |
81 Results
- 1Combination of fabric, thread and needle
- 2Where do I put the oil in my machine?
- 3It is difficult to pass the thread through the needle bar thread guide(hook).
- 4How do I recall a specific embroidery pattern from the computer?
- 5How do I clean the race?
- 6How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 7Why does the lower thread keep breaking?
- 8Fabric and Thread
- 9How do I save often-used patterns in the machine's memory?
- 10How do I select patterns from the embroidery cards (sold separately)?
- 11Place a spool of thread on a spool pin.
- 12How do I attach the embroidery frame?
- 13F** or "F*" appears on the LCD. What does it mean?
- 14Does my machine support Windows Vista/ Windows7?
- 15Upper Threading (Threading the upper thread)
- 16When can we use Standard GREEN Marked Bobbin Case?
- 17When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 18"Transmitting by USB." message appearing on the LCD. What does it mean?
- 19"Retrieving the pattern. Wait a moment." message appearing on the LCD. What does it mean?
- 20"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
- 21"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 22"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 23"No more stitches can be combined." message appearing on the LCD. What does it mean?
- 24"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 25"Insert an embroidery card." message appearing on the LCD. What does it mean?
- 26"The safety device has been activated." appears on the LCD.
- 27How do I raise or lower the feed dogs?
- 28How do I confirm Windows98SE?
- 29Why does the upper thread keep breaking?
- 30How do I sew buttonholes?
- 31How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 32Fabrics and stabilizer material for embroidery
- 33How do I correctly install a bobbin?
- 34For better results when sewing stretch fabrics
- 35To use your machine connected to the PC of Windows Vista/ Windows7
- 36How do I thread the twin needle?
- 37How do I manually thread the needle?
- 38How do I wind the bobbin?
- 39"Lower the presser foot lever." appears on the LCD.
- 40With free-motion quilting, skipped stitches or needle breakage occur
- 41How do I create a space between characters?
- 42"This key does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 43"Reduce the number of patterns. Only up to 12 patterns can be handled." message appearing on the LCD. What does it mean?
- 44"Do not send a USB transmittion while embroidering." message appearing on the LCD. What does it mean?
- 45"Deleting..." message appearing on the LCD. What does it mean?
- 46"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 47"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 48"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 49"OK to save the current settings?" message appearing on the LCD. What does it mean?
- 50"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?