FAQs & Troubleshooting
Popular |
54 Results
- 1Fabric puckers
- 2Combination of fabric, thread and needle
- 3Basic procedure to sew stitches
- 4Tips for sewing an even seam allowance
- 5Where do I put the oil in my machine?
- 6How do I draw up the lower thread by hand? (For models equipped with the quick-set bobbin)
- 7Outline of viewing the LCD Screen
- 8How to sew reverse stitches or reinforcement stitches
- 9How to use the foot controller with the machine
- 10How to select a stitch pattern
- 11Machine does not start to sew.
- 12How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 13The bobbin thread cannot be pulled up.
- 14How do I wind the bobbin?
- 15Basic technique for sewing
- 16Tips for sewing leathers or vinyl fabrics.
- 17Needle breaks.
- 18Tips for sewing thin fabrics
- 19Tips for sewing thick fabrics
- 20"F6" appears on the LCD. What does it mean?
- 21"F7" appears on the LCD. What does it mean?
- 22"F4" appears on the LCD. What does it mean?
- 23How do I remove or attach the presser foot ?
- 24Upper thread breaks.
- 25The machine does not make stitches
- 26"F1" appears on the LCD. What does it mean?
- 27Upper thread tightened up
- 28How do I install the bobbin wound with thread? (For models equipped with a quick-set bobbin)
- 29How do I thread my machine? (For models equipped with the needle threader)
- 30"E5" message appears on the LCD.
- 31Tips for sewing a decorative stitch pattern with the twin needle
- 32"F8" appears on the LCD. What does it mean?
- 33"F5" appears on the LCD. What does it mean?
- 34"F3" appears on the LCD. What does it mean?
- 35For better results when sewing stretch fabrics
- 36How do I change the needle ?
- 37Bobbin thread breaks
- 38"F9" appears on the LCD. What does it mean?
- 39"F2" appears on the LCD. What does it mean?
- 40How do I remove or attach the presser foot holder?
- 41Tangled thread on wrong side of fabric
- 42Fabric is caught in the machine and cannot be removed
- 43"E6" message appears on the LCD.
- 44"E4" message appears on the LCD.
- 45"E3" message appears on the LCD.
- 46"E1" message appears on the LCD.
- 47Stitches are skipped
- 48How to adjust the thread tension
- 49How do I adjust a stitch width or length?
- 50Incorrect thread tension