FAQs & Troubleshooting
Popular |
24 Results
- 1Where do I put the oil in my machine?
- 2It is difficult to pass the thread through the needle bar thread guide(hook).
- 3Combination of fabric, thread and needle
- 4How do I wind the bobbin?
- 5When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 6Why does the needle keep breaking?
- 7When thread got tangled.
- 8How do I draw up the lower thread by hand? (For models equipped with a quick-set bobbin.)
- 9How do I clean the machine? (Cleaning the race)
- 10How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 11The machine does not make stitches
- 12Can I lower the feed dogs so that my machine doesn't feed fabric automatically?
- 13Tangled thread on wrong side of fabric
- 14How do I change the needle ?
- 15How do I select a pattern, and adjust a stitch width or length?
- 16How do I install the bobbin wound with thread? (For models equipped with a quick-set bobbin)
- 17The thread tension is incorrect.
- 18How do I sew such as vinyl, leather, quilting layers and velvet?
- 19Why does the lower thread keep breaking?
- 20Upper threading (Point)
- 21Incorrect thread tension
- 22The bobbin thread cannot be pulled up.
- 23How do I thread my machine? (for models equipped with a needle threader)
- 24Fabric and Thread