FAQs & Troubleshooting
![]() |
Latest |
84 Results
- 112/07/2024"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 212/07/2024Combination of fabric, thread and needle
- 312/07/2024"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 412/03/2024Stitches are skipped
- 522/02/2024Fabric puckers
- 624/05/2023How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 702/05/2023Where do I put the oil in my machine?
- 813/03/2023Incorrect thread tension
- 906/03/2023How do I edit the stitch stored in the machine with MY CUSTOM STITCH function?
- 1021/02/2023Outline of viewing and functions for keys on the utility stitch screen and the decorative stitch screen
- 1125/01/2023"USB media error" message appears on the LCD. What does it mean?
- 1216/06/2022Needle breaks.
- 1310/06/2022How do I adjust thread tension for embroidering?
- 1410/06/2022Upper thread breaks.
- 1506/06/2022How do I hoop the fabric in the embroidery frame?
- 1602/06/2022Bobbin thread breaks
- 1727/05/2022Tips for sewing thick fabrics
- 1823/05/2022Tips for sewing leathers or vinyl fabrics.
- 1928/04/2022Basic procedure to sew stitches
- 2026/04/2022How to adjust the thread tension
- 2126/04/2022Machine does not start to sew.
- 2205/04/2022How do I adjust a stitch width or length?
- 2315/10/2020The bobbin thread cannot be pulled up.
- 2415/10/2020The machine does not make stitches
- 2513/04/2018Tips for sewing thin fabrics
- 2621/07/2017For better results when sewing stretch fabrics
- 2721/07/2017"F**" appears on the LCD. What does it mean?
- 2821/07/2017"This pattern cannot be loaded as the pattern extends out of the editable area." message appears on the LCD. What does it mean?
- 2921/07/2017"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 3021/07/2017"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 3128/02/2017How do I sew with the twin needle?
- 3228/02/2017"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
- 3328/02/2017How do I remove or attach the presser foot holder?
- 3428/02/2017"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 3528/02/2017Tangled thread on wrong side of fabric
- 3628/02/2017Fabric is caught in the machine and cannot be removed
- 3728/02/2017"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 3828/02/2017How do I remove or attach the Embroidery foot ?
- 3928/02/2017How do I attach or remove the Embroidery Unit?
- 4028/02/2017How do I change the needle ?
- 4128/02/2017How do I remove or attach the presser foot ?
- 4228/02/2017How do I thread the machine (Threading the upper thread)?
- 4328/02/2017How do I wind the bobbin?
- 4428/02/2017"Turn off the power and replace the needle plate." appears on the LCD.
- 4528/02/2017"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 4628/02/2017"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 4728/02/2017"Lower the buttonhole lever." message appears on the LCD. What does it mean and how do I clear it?
- 4828/02/2017"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 4928/02/2017"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 5028/02/2017How do I clean the race?