FAQs & Troubleshooting
![]() |
Popular |
56 Results
- 1Combination of fabric, thread and needle
- 2How to adjust the thread tension
- 3Stitches are skipped
- 4How do I set the bobbin?
- 5How do I thread the machine (Threading the upper thread)?
- 6Basic procedure to sew stitches
- 7Tips for sewing thin fabrics
- 8How do I wind the bobbin?
- 9How do I clean the race?
- 10Upper thread breaks.
- 11Fabric puckers
- 12How do I adjust a stitch width or length?
- 13Outline of viewing the LCD Screen
- 14Needle breaks.
- 15"F9" appears on the LCD. What does it mean?
- 16How do I change the needle ?
- 17Where do I put the oil in my machine?
- 18How do I pull up the bobbin thread?
- 19"F1" appears on the LCD. What does it mean?
- 20Upper thread tightened up
- 21Machine does not start to sew.
- 22How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 23Basic technique for sewing
- 24How to change the needle stop position
- 25Tips for sewing leathers or vinyl fabrics.
- 26List of Error Messages
- 27"E9" message appears on the LCD.
- 28The bobbin thread cannot be pulled up.
- 29Bobbin thread breaks
- 30The machine does not make stitches
- 31"F8" appears on the LCD. What does it mean?
- 32Tips for sewing thick fabrics
- 33Tips for sewing an even seam allowance
- 34How to use the foot controller with the machine
- 35"F7" appears on the LCD. What does it mean?
- 36"F6" appears on the LCD. What does it mean?
- 37"F5" appears on the LCD. What does it mean?
- 38"F4" appears on the LCD. What does it mean?
- 39"F3" appears on the LCD. What does it mean?
- 40"F2" appears on the LCD. What does it mean?
- 41It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
- 42How do I remove or attach the presser foot holder?
- 43Tangled thread on wrong side of fabric
- 44Fabric is caught in the machine and cannot be removed
- 45Incorrect thread tension
- 46When the thread became tangled under the bobbin winder seat
- 47How do I remove or attach the presser foot ?
- 48"E8" message appears on the LCD.
- 49"E7" message appears on the LCD.
- 50"E6" message appears on the LCD.