FAQs & Troubleshooting
![]() |
Popular |
63 Results
- 1Combination of fabric, thread and needle
- 2How do I retrieve a specific embroidery pattern from the computer to the machine via a USB media?
- 3Place a spool of thread on a spool pin.
- 4When thread got tangled.
- 5Fabric and Thread
- 6F** or "F*" appears on the LCD. What does it mean?
- 7Why does my thread keep jamming?
- 8How do I manually thread the needle?
- 9How do I thread the machine (Threading the upper thread)?
- 10How do I wind the bobbin?
- 11With free-motion quilting, skipped stitches or needle breakage occur
- 12When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 13"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
- 14"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 15"Lower the buttonhole lever." appears on the LCD.
- 16"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 17How do I raise or lower the feed dogs?
- 18Why does the needle keep breaking?
- 19How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 20How do I correctly install a bobbin?
- 21For better results when sewing stretch fabrics
- 22Where do I put the oil in my machine?
- 23How do I thread the needle?
- 24How do I save often-used patterns in the machine's memory?
- 25"Lower the presser foot lever." appears on the LCD.
- 26It is difficult to pass the thread through the needle bar thread guide(hook).
- 27"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
- 28"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 29"Deleting..." message appearing on the LCD. What does it mean?
- 30"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 31"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 32"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 33"OK to save the current settings?" message appearing on the LCD. What does it mean?
- 34"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 35"Disconnect the foot controller." message appearing on the LCD. What does it mean?
- 36"Saving..." message appearing on the LCD. What does it mean?
- 37"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 38"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 39"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 40"Selected a pattern." appears on the LCD.
- 41"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 42"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 43"Change to the single needle mode." appears on the LCD.
- 44"Lift the buttonhole lever." appears on the LCD.
- 45"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 46"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 47"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 48"The safety device has been activated." appears on the LCD.
- 49How do I remove the presser foot holder?
- 50How do I select patterns from the embroidery cards (sold separately)?