FAQs & Troubleshooting
Popular |
64 Results
- 1When thread got tangled.
- 2It is difficult to pass the thread through the needle bar thread guide(hook).
- 3"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 4"Deleting..." message appearing on the LCD. What does it mean?
- 5Why does my thread keep jamming?
- 6Incorrect thread tension
- 7Where do I put the oil in my machine?
- 8"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 9How do I remove the presser foot holder?
- 10How do I raise or lower the feed dogs?
- 11When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 12How do I save often-used patterns in the machine's memory?
- 13When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 14"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 15"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
- 16"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 17"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 18"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 19"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 20F** or "F*" appears on the LCD. What does it mean?
- 21For better results when sewing stretch fabrics
- 22How do I retrieve a specific embroidery pattern from the computer to the machine via a USB media?
- 23How do I thread the needle?
- 24How do I manually thread the needle?
- 25How do I thread the machine (Threading the upper thread)?
- 26How do I wind the bobbin?
- 27"Lower the presser foot lever." appears on the LCD.
- 28With free-motion quilting, skipped stitches or needle breakage occur
- 29"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
- 30"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 31"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 32"OK to save the current settings?" message appearing on the LCD. What does it mean?
- 33"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 34"Disconnect the foot controller." message appearing on the LCD. What does it mean?
- 35"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 36"Saving..." message appearing on the LCD. What does it mean?
- 37"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 38"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 39"Selected a pattern." appears on the LCD.
- 40"Change to the single needle mode." appears on the LCD.
- 41"Lower the buttonhole lever." appears on the LCD.
- 42"Lift the buttonhole lever." appears on the LCD.
- 43"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 44"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 45"The safety device has been activated." appears on the LCD.
- 46How do I select patterns from the embroidery cards (sold separately)?
- 47The thread tension is incorrect.
- 48Why does the upper thread keep breaking?
- 49The embroidery cover (the extension table) cannot put on the embroidery unit.
- 50Why is the outline sewing off the pattern?