FAQs & Troubleshooting
Popular |
35 Results
- 1It is difficult to pass the thread through the needle bar thread guide(hook).
- 2Where do I put the oil in my machine?
- 3Replacing the presser foot
- 4Tangled thread on wrong side of fabric
- 5Fabric is caught in the machine and cannot be removed
- 6Incorrect thread tension
- 7Why does my thread keep jamming?
- 8Why does the needle keep breaking?
- 9How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 10How do I sew such as vinyl, leather, quilting layers and velvet?
- 11Why does the lower thread keep breaking?
- 12How do I correctly install a bobbin?
- 13F** or "F*" appears on the LCD. What does it mean?
- 14How do I remove or attach the presser foot holder?
- 15Replacing the needle
- 16When the thread became tangled under the bobbin winder seat
- 17Upper thread tightened up
- 18For better results when sewing stretch fabrics
- 19How do I thread the machine using the Twin Needle?
- 20How do I manually thread the needle?
- 21How do I thread the machine (Threading the upper thread)?
- 22Using the needle threader (for models without the thread guide disk)
- 23How do I wind the bobbin?
- 24When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 25An "E6" message appears on the panel.
- 26An icon indicating an error appears on the LCD.
- 27The thread tension is incorrect.
- 28Why does the upper thread keep breaking?
- 29How do I sew buttonholes?
- 30How do I sew an applique?
- 31How do I sew a blind hem?
- 32Place a spool of thread on a spool pin.
- 33Combination of fabric, thread and needle
- 34When thread got tangled.
- 35Fabric and Thread