FAQs & Troubleshooting
![]() |
Popular |
234 Results
- 1I find some scratches outside the grid area (the attaching area) on the mat. Why is such a scratch attached on the mat?
- 2Can I create the cutting data for ScanNCut from vector graphics data?
- 3About Blade Extension, Cutting Pressure and Mat
- 4How long will the mat last?
- 5Mat and Material Combinations
- 6Can I create the cutting data for ScanNCut from the image data?
- 7How do I Edit Pictures ? (Adjusting Image Detection Levels)
- 8If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 9What should I do if the scanned and cut positions are misaligned?
- 10What type of data can my ScanNCut machine be used?
- 11How do I Create the Cutting Data (Scan to Cut Data) ?
- 12ErrS99 appears on the computer screen.
- 13ErrS25 appears on the computer screen.
- 14ErrS10 appears on the computer screen.
- 15E92002 appears on the computer screen.
- 16E03006 appears on the computer screen.
- 17E03005 appears on the computer screen.
- 18Can the Cutting mat or Scanning mat for the ScanNCut (CM series) be used in the ScanNCut DX (SDX series)?
- 19What should I do if I change the size (enlarge/reduce) of the Disney Pattern downloaded?
- 20E94005 appears on the computer screen.
- 21E94001 appears on the computer screen.
- 22E00009 appears on the computer screen.
- 23List of Error Messages
- 24FC1 files on USB flash drives of optional patterns cannot be imported into CanvasWorkspace.
- 25How to create an account for CanvasWorkspace
- 26Region Embossing
- 27Where can I purchase any consumables or options for Brother Cutting Machine?
- 28There are deep cuts completely through the mat.
- 29When the mat is inserted, the attached material peels off.
- 30Shortcut Keys for CanvasWorkspace (Windows/Mac)
- 31What accessory kits are available?
- 32Important Information about Mat
- 33The metal sheet became cloudy when peeling the protective sheet off, what should I do?
- 34How can I properly emboss without the material tearing?
- 35What should I do if I want to change the initial setting (position adjustment) for region embossing?
- 36"There is a pattern out of the effective area. The pattern cannot be cut or drawn. OK to continue?" message appearing on the LCD. What does it mean?
- 37"The data cannot be read." message appearing on the LCD. What does it mean?
- 38"Patterns may overlap since seam allowance is set to large on the machine." message appearing on the LCD. What does it mean?
- 39"Not enough space on the mat. Check pattern size, space on the mat, Cut Area (setting) or Pattern Interval (setting)." message appearing on the LCD. What does it mean?
- 40"Initialization of the head failed. Turn the machine off." message appearing on the LCD.
- 41Loading and Unloading the Mat
- 42Settings for Specific Functions
- 43The mat cannot be fed out.
- 44N11003 appears on the computer screen.
- 45E11011 appears on the computer screen.
- 46E11010 appears on the computer screen.
- 47Instructions for “Fit to Path” Function on CanvasWorkspace (Windows/Mac)
- 48The Exported Cut Data is Different from the Desired Data
- 49Downloading Optional Design Pattern Collection
- 50Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®