FAQs & Troubleshooting
Latest |
108 Results
- 5129/07/2016"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 5229/07/2016"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 5329/07/2016"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 5429/07/2016"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 5529/07/2016"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 5629/07/2016"Transmitting by USB" message appears on the LCD. What does it mean?
- 5729/07/2016"USB media error" message appears on the LCD. What does it mean?
- 5829/07/2016"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 5929/07/2016"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 6029/07/2016"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 6129/07/2016"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 6229/07/2016"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 6329/07/2016"Attach the embroidery frame." message appears on the LCD. What does it mean?
- 6429/07/2016"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 6529/07/2016"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 6629/07/2016"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 6711/03/2016How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 6811/03/2016How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 6911/03/2016How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 7023/10/2015Why does the lower thread keep breaking?
- 7121/10/2015Combination of fabric, thread and needle
- 7214/05/2015How do I attach or remove the embroidery frame ?
- 7314/05/2015How do I change the needle ?
- 7414/05/2015How do I thread my machine ?
- 7514/05/2015How do I set the bobbin ?
- 7614/05/2015How do I wind the bobbin?
- 7714/05/2015How do I clean the race?
- 7814/05/2015How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 7914/05/2015Why is the outline sewing off the pattern?
- 8022/04/2015How do I sew a blind hem?
- 8120/03/2015How to use the Multi-purpose Screwdriver.
- 8220/03/2015Embroidery
- 8324/01/2014When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 8413/05/2013How do I specify the embroidering location with the sensor pen? (Specifying the embroidery pattern location by selecting the pattern center with the sensor pen.)
- 8510/05/2013How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
- 8610/05/2013How do I specify the sewing end point with the sensor pen for utility stitches/ character decorative stitches?
- 8710/05/2013How do I specify the sewing end point with the sensor pen for utility stitches?
- 8821/03/2013For better results when sewing stretch fabrics
- 8920/11/2012The thread tension is incorrect.
- 9020/11/2012Why does the needle keep breaking?
- 9107/11/2012If the thread breaks during sewing.
- 9203/10/2012How do I change the volume of operation sounds or alarm sounds?
- 9303/10/2012How do I specify the stitchiing width and stitch position using the sensor pen?
- 9403/10/2012How do I specify the needle drop position using the sensor pen?
- 9503/10/2012How to specify the Guideline Marker Position With the Sensor Pen
- 9603/10/2012About Sensor Function Area
- 9721/09/2012How do I calibrate the sensor pen?
- 9821/09/2012How do I attach or remove the Embroidery Unit?
- 9921/09/2012How do I attach the Embroidery foot “W+” with LED pointer or “W”?
- 10021/09/2012How do I adjust the clock on the display?