FAQs & Troubleshooting
Popular |
336 Results
- 1How to Activate an Accessory Kit* (Rhinestone, Emboss Kit, etc.) for the Cutting Machine.
- 2Can the Cutting mat or Scanning mat for the ScanNCut (CM series) be used in the ScanNCut DX (SDX series)?
- 3List of Error Messages
- 4Half Cut (Kiss Cut) Settings
- 5How to Calibrate the LCD Touchscreen Display
- 6What is the lever (scanner lever) on the left side of the machine?
- 7E00010 appears on the computer screen.
- 8E00004 appears on the computer screen.
- 9How to use Standard Cut Blade Holder and Deep Cut Blade Holder
- 10How to Import My Project to CanvasWorkspace [Video]
- 11Cutting with the Rotary Auto Blade [Video]
- 12List of Error Messages for CanvasWorkspace (Others)
- 13ErrS90 appears on the computer screen.
- 14ErrS09 appears on the computer screen.
- 15How to Activate the Calligraphy Kit
- 16“Cannot unload the mat. Pull the mat after turning the machine off.” message appearing on the LCD touchscreen display. What does it mean?
- 17Where can I purchase any consumables or options for Brother Cutting Machine?
- 18"There are some patterns which cannot add seam allowance." message appearing on the LCD. What does it mean?
- 19Introducing the Brother Artspira application
- 20Thumbnail of the Cutting Data Is Not Displayed Correctly.
- 21What types of rolls can be used with the roll feeder (optional accessory)?
- 22Can the cutting machine cut all materials automatically with the auto blade?
- 23E02001 appears on the computer screen.
- 24The Material to be Cut is Not Cleanly Cut with the Roll Feeder.
- 25Changing and Deleting CanvasWorkspace login ID that is registered to your machine with CanvasWorkspace
- 26Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 27Downloading Optional Design Pattern Collection (My Collection Function)
- 28The pattern to be scan is not cleanly scanned
- 29How do I Cut Around Drawings?
- 30Draw Patterns with Calligraphy Pen
- 31The material was not cut successfully using the half-cut (kiss cut) setting.
- 32How to Install the Roll Feeder
- 33What type of material can be cut with the cutting machine?
- 34Thin Fabric Auto Blade (Beige) [Video]
- 35E11002 appears on the computer screen.
- 36E02002 appears on the computer screen.
- 37Downloading CanvasWorkspace application and Login [Video]
- 38How to create an account for CanvasWorkspace
- 39How do I perform the initial setting (position adjustment) for region embossing?
- 40What should I do if I want to change the initial setting (position adjustment) for region embossing?
- 41How to find the SSID (Network Name) and Network Key (Password)
- 42How do I Create the Cutting Data (Scan to Cut Data) ?
- 43The mat cannot be inserted.
- 44M6331001 appears on the Artspira app screen.
- 45M1332002 appears on the Artspira app screen.
- 46How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 47If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 48What Should I Do If the Trimmer Blade Has Been Removed from the Trimmer?
- 49The material slips on the mat when a thick or hard material such as chipboard and grayboard is being cut.
- 50About CanvasWorkspace