FAQs & Troubleshooting
Popular |
98 Results
- 1Tutorial videos on how to use the machine [Video instructions]
- 2How to use the Clamp frame (PRCLPM1 / PRCLP100B / PRCLPM1AP) [Video instructions]
- 3How to use the Round frame (PRPRFK1) [Video instructions]
- 4Replacing the needle [Video instructions]
- 5Colors of Tajima (.dst) embroidery data
- 6How to use the Tubular frame table (PRTT1 / PRTT1AP) [Video instructions]
- 7How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 8How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 9The thread tension is incorrect.
- 10Color thread table
- 11How to set up the cap frame driver. [Video instructions]
- 12Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 13Fabric/stabilizer compatibility chart
- 14Replacing the hook of the automatic needlethreading mechanism [Video instructions]
- 15When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 16Embroidery pattern does not sew out correctly.
- 17"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 18"Not enough available memory to save." message appears on the LCD. What does it mean?
- 19"Can not recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean and how do I clear it?
- 20How to select the "Eco Mode" or "Shutoff Support Mode" ?
- 21Creating Beautiful Embroidery ( Hooping techniques )
- 22How do I adjust the tension of the bobbin thread ?
- 23What is DST ?
- 24Why does the upper thread keep breaking?
- 25"Preventive maintenance is recommended" appears on the LCD.
- 26The needle threader cannot be used.
- 27Stitches are skipped.
- 28LED pointer does not indicate the position correctly.
- 29Nothing happens, even if the LCD display is pressed.
- 30Bobbin thread does not wind neatly on the bobbin.
- 31Upper thread tightened up.
- 32"Wiper error." message appears on the LCD. What does it mean and how do I clear it?
- 33"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 34"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 35"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 36"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 37"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 38"OK to cancel embroidering?" message appears on the LCD. What does it mean and how do I clear it?
- 39"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 40How do I embroider on small pieces of fabric ?
- 41Creating Beautiful Embroidery (Threads)
- 42How do I resume embroidering after turning off the machine ?
- 43How do I wind the bobbin?
- 44Maintenance (Cleaning the thread paths of the upper threads)
- 45Maintenance (Cleaning around the needle plate)
- 46Maintenance (Clean the hook)
- 47"Picker error" message appears on the LCD. What does it mean?
- 48"Needle threader error." message appears on the LCD. What does it mean and how do I clear it?
- 49Why does the needle keep breaking?
- 50How do I thread the machine? (Threading the upper thread)