FAQs & Troubleshooting
![]() |
Popular |
109 Results
- 1How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 2Fabric and Thread
- 3How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 4How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 5Combination of fabric, thread and needle
- 6"Set the clock." message appears on the LCD. What does it mean?
- 7"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 8Why does the lower thread keep breaking?
- 9"Preventive maintenance is recommended" appears on the LCD.
- 10"OK to delete the setting?" message appears on the LCD. What does it mean?
- 11How do I wind the bobbin?
- 12"USB media error" message appears on the LCD. What does it mean?
- 13"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 14"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 15How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]
- 16How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 17For better results when sewing stretch fabrics
- 18How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
- 19How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 20How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 21How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 22"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 23How do I create a space between characters?
- 24"This USB media is incompatible." message appears on the LCD. What does it mean?
- 25"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 26How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 27How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 28How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
- 29"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 30How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 31How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 32How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 33How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 34How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 35How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 36How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 37How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 38"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 39How do I clean the race?
- 40"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 41How do I set the bobbin ?
- 42"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 43"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 44How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 45The bobbin thread cannot be pulled up.
- 46The machine does not make stitches
- 47How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 48How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 49"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 50How do I attach the walking foot ?