FAQs & Troubleshooting
Popular |
149 Results
- 1How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 2How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 3How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 4How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 5How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 6How to use the Multi-purpose Screwdriver.
- 7How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 8How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 9How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 10How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 11Embroidery
- 12Combination of fabric, thread and needle
- 13"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 14Why does the lower thread keep breaking?
- 15When thread got tangled.
- 16When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 17The bobbin thread cannot be pulled up.
- 18How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 19How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 20"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 21How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 22How to specify the Guideline Marker Position With the Sensor Pen
- 23How do I thread my machine ?
- 24How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 25How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 26How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 27How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 28How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 29How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 30How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 31How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 32How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 33How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 34Where do I put the oil in my machine?
- 35"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 36"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 37When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 38How do I clean the race?
- 39How do I remove or attach the presser foot holder?
- 40"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 41"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
- 42"Remove Dual Feed module from the machine." message appears on the LCD. What does it mean?
- 43"OK to revert to the original position and/or angle?" message appears on the LCD. What does it mean?
- 44"OK to delete the ending point setting?" message appears on the LCD. What does it mean?
- 45"Failed to save file." message appears on the LCD. What does it mean?
- 46How do I attach or remove the Embroidery Unit?
- 47How do I attach the Embroidery foot “W+” with LED pointer or “W”?
- 48How do I change the needle ?
- 49"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 50"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?