FAQs & Troubleshooting
![]() |
Popular |
127 Results
- 1How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 2How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
- 3How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 4How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 5"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 6How do I attach or remove the Embroidery Unit?
- 7How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]
- 8If the thread breaks during sewing.
- 9"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
- 10How do I attach the Embroidery foot “W+” with LED pointer or “W”?
- 11How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 12How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 13How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 14"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 15"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 16When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 17"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 18How do I remove or attach the presser foot ?
- 19How do I wind the bobbin?
- 20"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 21Why does the needle keep breaking?
- 22When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 23How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 24How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 25How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 26How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 27The bobbin thread cannot be pulled up.
- 28The machine does not make stitches
- 29How to use the Needle Felting Foot. (Optional accessory : SA280/ NFAHS1) [Video instructions]
- 30How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 31How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 32How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 33How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 34How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 35How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 36How to use the Multi-purpose Screwdriver.
- 37How do I remove or attach the presser foot holder?
- 38How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 39How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 40How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 41For better results when sewing stretch fabrics
- 42"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 43"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 44"This file cannot be used." message appears on the LCD. What does it mean?
- 45"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 46"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 47"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 48"Set the clock." message appears on the LCD. What does it mean?
- 49"Remove Embroidery foot with LED pointer from the machine." message appears on the LCD. What does it mean?
- 50"Remove Dual Feed module from the machine." message appears on the LCD. What does it mean?