FAQs & Troubleshooting
Popular |
93 Results
- 1Tutorial videos on how to use the machine [Video instructions]
- 2How do I adjust thread tension for embroidering?
- 3Stitches are skipped
- 4How do I hoop the fabric in the embroidery frame?
- 5The wireless network connection cannot be set up between the embroidery machine and the computer with PE-DESIGN 11.
- 6"Preventive maintenance is recommended." ppears on the LCD.
- 7The embroidery design cannot be imported to the design page on PE-DESIGN 11 from the embroidery machine via the wireless network.
- 8The embroidery design data cannot be transferred from PE-DESIGN 11 to the embroidery machine via the wireless network.
- 9How do I clean the race?
- 10How to obtain and input PIN of machine
- 11Data cannot be saved to a USB flash drive
- 12The pattern transferred from the Artspira app does not appear on the screen of the machine
- 13Data cannot be transferred even though the machine number has been input. (M5622201)
- 14There is no machine that can be transferred
- 15How to disconnect the machine from Artspira using the Artspira app
- 16Introducing the Brother Artspira application
- 17"The wireless LAN access point/router cannot be detected. " message appears on the LCD. What does it mean?
- 18Needle breaks.
- 19"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 20"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
- 21"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 22Embroidery
- 23How to stop "Send usage information to help improve Brother products and services"
- 24How to unsubscribe from Artspira
- 25How to disconnect a machine from Artspira using the machine
- 26How to connect your machine and transfer data to Artspira
- 27About the contents and data treated by Artspira app
- 28List of Error Messages for Artspira app (M#######/E#####)
- 29M4452001 appears on the Artspira app screen.
- 30M4341001 appears on the Artspira app screen.
- 31M4210001 appears on the Artspira app screen.
- 32M3124301 appears on the Artspira app screen.
- 33M2102501 appears on the Artspira app screen.
- 34How to find the security information (SSID and network key) for your home network
- 35"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 36"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 37"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 38"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 39"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 40How do I attach or remove the Embroidery Unit?
- 41How do I change the needle ?
- 42How do I remove or attach the presser foot ?
- 43How do I thread the machine (Threading the upper thread)?
- 44"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 45"This USB media cannot be used." message appears on the LCD. What does it mean?
- 46"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 47"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean and how do I clear it?
- 48"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 49"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 50I cannot view the Cutting and Embroidery Designs using the [AR function]. (AndroidTM Device only)