FAQs & Troubleshooting
![]() |
Popular |
57 Results
- 1Tutorial videos on how to use the machine [Video instructions]
- 2How to use the Multi-purpose Screwdriver.
- 3How do I hoop the fabric in the embroidery frame?
- 4How do I select or display patterns according to the embroidery frame size?
- 5How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 6How do I enter a line feed in the embroidery pattern?
- 7Fabric puckers
- 8How do I retrieve the patterns from the machine’s memory?
- 9How do I edit a single letter in the embroidery pattern?
- 10How do I adjust the sensitivity of the operation keys?
- 11How do I save the embroidery patterns in the machine’s memory?
- 12Where do I put the oil in my machine?
- 13How do I clean the race?
- 14Stitches are skipped
- 15How do I adjust thread tension for embroidering?
- 16"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 17When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 18How do I change the needle ?
- 19"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 20"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 21How do I change the font type in the embroidery pattern?
- 22When the thread became tangled under the bobbin winder seat
- 23How do I remove or attach the Embroidery foot ?
- 24How do I thread the machine (Threading the upper thread)?
- 25"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 26"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 27Needle breaks.
- 28"F**" appears on the LCD. What does it mean?
- 29"Selected pattern field extends to the outside of the embroidery frame." message appears on the LCD. What does it mean?
- 30How do I attach or remove the Embroidery Unit?
- 31How do I wind the bobbin?
- 32"USB media error" message appears on the LCD. What does it mean?
- 33"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 34"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 35Upper thread breaks.
- 36"Not enough available memory to save." message appears on the LCD. What does it mean?
- 37"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 38"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 39How do I attach or remove the embroidery frame ?
- 40How do I remove or attach the presser foot ?
- 41Embroidery
- 42"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 43"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 44"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 45"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
- 46How do I set the bobbin ?
- 47"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 48"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 49"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 50"This USB media cannot be used." message appears on the LCD. What does it mean?