FAQs & Troubleshooting
![]() |
Popular |
145 Results
- 1Combination of fabric, thread and needle
- 2Why does the lower thread keep breaking?
- 3Fabric and Thread
- 4"Use the presser foot lifter button to raise the presser foot." message appears on the LCD. What does it mean?
- 5How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 6How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 7When thread got tangled.
- 8When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 9How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 10How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 11How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 12How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 13How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 14How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 15The stitch patterns cannot be selected.
- 16How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 17Can I get some movies or illustrations on the machine LCD to get how to thread the machine, change presser feet, wind the bobbin, etc?
- 18"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 19How do I manually thread my machine?
- 20The needle or the presser foot can not be changed in the free-motion sewing mode.
- 21"The feed dogs are lowerd. Raise them." message appearing on the LCD. What does it mean and how do I clear it?
- 22"Can not change the configuration of the characters." message appearing on the LCD. What does it mean and how do I clear it?
- 23"There is no embroidery card in card slot. Insert an embroidery card." message appearing on the LCD. What does it mean and how do I clear it?
- 24How do I use a prewound bobbin?
- 25How do I correctly install a bobbin?
- 26How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 27How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 28How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 29How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 30How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 31How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 32How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 33How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 34How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 35How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 36How to use the Concealed Zipper Foot. (Optional accessory : SA128 / F004N) [Video instructions]
- 37How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 38How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 39Sewing is started even though the presser foot is raised.
- 40It is difficult to pass the thread through the needle bar thread guide(hook).
- 41How do I recall a specific embroidery pattern from the computer?
- 42"This USB media is incompatible." message appearing on the LCD. What does it mean and how do I clear it?
- 43"Lower the presser foot lever." message appearing on the LCD. What does it mean and how do I clear it?
- 44"The USB media was changed. Do not change the USB media while it is being read." message appearing on the LCD. What does it mean and how do I clear it?
- 45"This USB media cannot be used." message appearing on the LCD. What does it mean and how do I clear it?
- 46"The bobbin winder safety device has activated. Is the thread tangled?" message appearing on the LCD. What does it mean and how do I clear it?
- 47"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- 48"Data volume is too large for this pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 49"This embroidery card can not be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 50How do I remove the presser foot holder?