FAQs & Troubleshooting
Popular |
138 Results
- 1When thread got tangled.
- 2It is difficult to pass the thread through the needle bar thread guide(hook).
- 3"This button does not operate when the embroidery unit is attached." message appears on the LCD. What does it mean?
- 4How to use the Multi-purpose Screwdriver.
- 5How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 6How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 7How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 8"OK to save the current setting?" message appearing on the LCD. What does it mean and how do I clear it?
- 9How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
- 10How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 11How do I recall a specific embroidery pattern from the computer?
- 12"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 13Why does my thread keep jamming?
- 14Why does the upper thread keep breaking?
- 15Why does the needle keep breaking?
- 16"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 17"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 18"The bobbin winder safety device has activated. Is the thread tangled?" message appearing on the LCD. What does it mean and how do I clear it?
- 19How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 20How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 21How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 22How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 23How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 24How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 25How can I speed the transfer rate up to retrieve embroidery patterns from the USB flash drive?
- 26"There is a pattern included that can not be saved to USB media/computer. Save the pattern in the machine's memory." message appearing on the LCD. What does it mean and how do I clear it?
- 27"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 28"Not enough available memory to save the pattern. Delete another pattern?" message appearing on the LCD. What does it mean and how do I clear it?
- 29"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
- 30"Data volume is too large for this pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 31How do I remove the presser foot holder?
- 32What kinds of thread should I use as bobbin threads when I do embroidery?
- 33Fabrics and stabilizer material for embroidery
- 34Combination of fabric, thread and needle
- 35For better results when sewing stretch fabrics
- 36"The presser foot will move up and down. Keep your hands, etc. away from the presser foot." message appearing on the LCD. What does it mean and how do I clear it?
- 37"Connected to PC. Do not disconnect the USB cable." message appearing on the LCD. What does it mean and how do I clear it?
- 38"OK to automatically lower the presser foot?" message appearing on the LCD. What does it mean and how do I clear it?
- 39"This USB media cannot be used." message appearing on the LCD. What does it mean and how do I clear it?
- 40"USB media is not loaded. Load USB media." message appearing on the LCD. What does it mean and how do I clear it?
- 41"Retrieving the pattern. Wait a moment." message appearing on the LCD. What does it mean and how do I clear it?
- 42"The bobbin thread is almost empty." message appearing on the LCD. What does it mean and how do I clear it?
- 43"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- 44"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 45How do I sew such as vinyl, leather, quilting layers and velvet?
- 46Fabric and Thread
- 47When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 48How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 49How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 50How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]