FAQs & Troubleshooting
![]() |
Popular |
103 Results
- 1How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 2How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 3How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 4How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
- 5How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 6How do I remove the presser foot holder?
- 7Place a spool of thread on a spool pin.
- 8How do I attach the embroidery frame?
- 9"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
- 10How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 11How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 12How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 13How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 14Where do I put the oil in my machine?
- 15Upper Threading (Threading the upper thread)
- 16How do I raise or lower the feed dogs?
- 17How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 18How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 19How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 20How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 21"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 22"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 23Combination of fabric, thread and needle
- 24Upper threading (Point)
- 25How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 26F** or "F*" appears on the LCD. What does it mean?
- 27How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 28How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
- 29How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 30How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 31How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 32How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 33How do I thread the twin needle?
- 34When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 35"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 36"Disconnect the foot controller." message appearing on the LCD. What does it mean?
- 37"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 38How do I clean the race?
- 39How do I select patterns from the embroidery cards (sold separately)?
- 40How do I wind the bobbin?
- 41"Deleting..." message appearing on the LCD. What does it mean?
- 42"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 43"Saving..." message appearing on the LCD. What does it mean?
- 44"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 45"Data volume is too large for this pattern." message appearing on the LCD. What does it mean?
- 46"Twin needles can not be used for this pattern." appears on the LCD.
- 47"Lower the buttonhole lever." appears on the LCD.
- 48"Lift the buttonhole lever." appears on the LCD.
- 49"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 50The thread tension is incorrect.