FAQs & Troubleshooting
![]() |
Popular |
33 Results
- 1How to use the Blind Stitch Foot. (Optional accessory : SA214 / SA214AP / X76590-002) [Video instructions]
- 2How to use the Pearls and Sequins Foot. (Optional accessory : SA211 / X76670-002, XB0537-001) [Video instructions]
- 3Oiling
- 4Retracting knife
- 5Threading the upper looper
- 6How to use the Taping Foot. (Optional accessory : SA212 / X76663-001) [Video instructions]
- 7How to use the Piping Foot. (Optional accessory : SA210 / XB0241-101) [Video instructions]
- 8How to use the Gathering Foot. (Optional accessory : SA213 / X77459-001) [Video instructions]
- 9To secure chains
- 10Stitches are not uniform
- 11Threading the lower looper
- 12How to set the thread change assembly (Two-thread sewing)
- 13Cleaning
- 14Sewing Materials, Threads and Needles Comparison Chart
- 15THREADING
- 16Preparation before threading
- 17Adjusting the presser foot pressure
- 18How to remove and install the needle
- 19If threads break during sewing
- 20The fabric does not feed through.
- 21Adjusting the thread tension dials
- 22Free-arm sewing (removing bed extension)
- 23Fabric is puckered
- 24Skipped stitches
- 25Differential feed adjustment
- 26Using the wide table
- 27How to attach and remove the presser foot
- 28Needle
- 29Threads break
- 30Needles break
- 31Threading the left needle
- 32Threading the right needle
- 33How to use the thread spool cap