FAQs & Troubleshooting
Popular |
94 Results
- 1Maintenance (Clean the hook) [ Video ]
- 2Maintenance (Cleaning around the needle plate) [ Video ]
- 3How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 4How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 5Maintenance (Oiling the machine) [ Video ]
- 6Maintenance (Cleaning the bobbin case)
- 7How to use the Sleeve frame (PRHSL200 / PRHSL200AP) [Video instructions]
- 8"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 9How to set up the cap frame. [Video instructions]
- 10How to Embroider on Cap. [Video instructions]
- 11"The USB media is write-protected so the data cannot be deleted. Cancel the write-protection before trying to delete the data." message appears on the LCD. What does it mean?
- 12Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 13"There is a pattern included that cannot be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 14"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 15How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 16"This pattern cannot be used." message appears on the LCD. What does it mean?
- 17"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 18"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 19"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 20How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 21How to Embroider on Clothes. [Video instructions]
- 22When thread got tangled
- 23When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 24"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 25"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 26"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 27"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 28Maintenance (Cleaning the bobbin case) [ Video ]
- 29How do I change the volume of operation sounds or alarm sounds?
- 30"Inappropriate needle stop position" message appears on the LCD. What does it mean?
- 31How do I thread the machine? (Threading the upper thread)
- 32"Transmitting by USB" message appears on the LCD. What does it mean?
- 33There is looseness in the mounting jig when the fabric is placed in the cap frame/cylinder frame.
- 34"Impossible to set the start & the end points." message appears on the LCD. What does it mean?
- 35"Can not find the positioning mark, please set the frame to the previous position." message appears on the LCD. What does it mean?
- 36"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 37Maintenance (Oiling the machine)
- 38Maintenance (Clean the hook)
- 39"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
- 40"Needle bar case home position error." message appears on the LCD. What does it mean?
- 41"Stop while needle bar case transferring." message appears on the LCD. What does it mean?
- 42"Needle bar case position error" message appears on the LCD. What does it mean?
- 43"USB media error" message appears on the LCD. What does it mean?
- 44"The pattern extends out of the pattern area. Change position of the pattern and scan the new area." message appears on the LCD. What does it mean?
- 45"This pattern cannot combine." message appears on the LCD. What does it mean?
- 46"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 47"This file cannot be used." message appears on the LCD. What does it mean?
- 48"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 49"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 50"Data volume is too large for this pattern." message appears on the LCD. What does it mean?