FAQs & Troubleshooting
![]() |
Popular |
337 Results
- 1How to Activate an Accessory Kit* (Rhinestone, Emboss Kit, etc.) for the Cutting Machine.
- 2Mat, Cutting Blade and Material Combinations
- 3List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 4Downloading Optional Design Pattern Collection (My Collection Function)
- 5Can rough material be cut?
- 6Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 7How to use Standard Cut Blade Holder and Deep Cut Blade Holder
- 8How to Activate the Calligraphy Kit
- 9If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 10E02001 appears on the computer screen.
- 11E01002 appears on the computer screen.
- 12What Should I do if the Machine cannot be Turned On Correctly? (Machine's LCD Touchscreen Display is not displayed correctly)
- 13What type of material can be cut with the cutting machine?
- 14E02002 appears on the computer screen.
- 15Instructions for sending patterns created in CanvasWorkspace to the cutting machine via a USB Cable [Video]
- 16ErrS01 appears on the computer screen.
- 17Can tape other than masking tape be used to secure materials to the cutting mat?
- 18Can the Cutting mat or Scanning mat for the ScanNCut (CM series) be used in the ScanNCut DX (SDX series)?
- 19E01006 appears on the computer screen.
- 20E00006 appears on the computer screen.
- 21An error appears when trying to import a DXF file.
- 22There is no machine that can be transferred
- 23How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 24Troubleshooting about the Mat
- 25Can multiple sheets of material be overlapped and attached to the mat?
- 26Can an adhesive craft vinyl sheet be cut?
- 27Can the cutting machine cut felt, leather and synthetic leather?
- 28What thickness of material can be cut with the cutting machine?
- 29How to Use the Printable Sticker Function on CanvasWorkspace for PC [Video]
- 30N93001 appears on the computer screen.
- 31Changing and Deleting CanvasWorkspace login ID that is registered to your machine with CanvasWorkspace
- 32Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 33Scanning a Background Image (Background Scanning).
- 34The mat cannot be fed out.
- 35M4210001 appears on the Artspira app screen.
- 36M3124301 appears on the Artspira app screen.
- 37What should I do if I Cannot Connect My Machine to the Wireless Network?
- 38How can pens smaller than 9.6 mm be used with the universal pen holder?
- 39"There are some patterns which cannot set cutting distance from the outline." message appearing on the LCD. What does it mean?
- 40"Cannot operate when there are too many patterns." message appearing on the LCD. What does it mean?
- 41"A malfunction occurred. Turn the machine off, then on again." message appearing on the LCD.
- 42How to make Quilt.(using High tack adhesive fabric support sheet)[Video]
- 43How to unsubscribe from Artspira
- 44How to disconnect the machine from Artspira using the Artspira app
- 45M2102501 appears on the Artspira app screen.
- 46How can I cleanly cut hard and thick materials?
- 47N11003 appears on the computer screen.
- 48E11010 appears on the computer screen.
- 49ErrS04 appears on the computer screen.
- 50ErrS03 appears on the computer screen.