FAQs & Troubleshooting
Popular |
51 Results
- 1How do I hoop the fabric in the embroidery frame?
- 2How do I adjust thread tension for embroidering?
- 3How do I adjust the sensitivity of the operation keys?
- 4Where do I put the oil in my machine?
- 5How do I thread the machine (Threading the upper thread)?
- 6How do I wind the bobbin?
- 7Tutorial videos on how to use the machine [Video instructions]
- 8How do I edit a single letter in the embroidery pattern?
- 9How do I change the font type in the embroidery pattern?
- 10How do I change the needle ?
- 11Bobbin thread breaks
- 12"F**" appears on the LCD. What does it mean?
- 13How do I attach or remove the embroidery frame ?
- 14How do I remove or attach the Embroidery foot ?
- 15How do I set the bobbin ?
- 16"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 17Stitches are skipped
- 18How do I retrieve the patterns from the machine’s memory?
- 19How do I enter a line feed in the embroidery pattern?
- 20"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 21"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 22"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 23How do I attach or remove the Embroidery Unit?
- 24"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 25How do I clean the race?
- 26"Preventive maintenance is recommended" appears on the LCD.
- 27Embroidery
- 28"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 29How do I remove or attach the presser foot ?
- 30"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 31Needle breaks.
- 32Upper thread breaks.
- 33Fabric puckers
- 34"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 35"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 36How do I save the embroidery patterns in the machine’s memory?
- 37"Not enough available memory to save." message appears on the LCD. What does it mean?
- 38"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 39"Selected pattern field extends to the outside of the embroidery frame." message appears on the LCD. What does it mean?
- 40"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 41"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
- 42"USB media error" message appears on the LCD. What does it mean?
- 43"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 44"This USB media cannot be used." message appears on the LCD. What does it mean?
- 45"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean and how do I clear it?
- 46"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 47"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 48"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 49"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 50"Check and rethread the upper thread." message appears on the LCD. What does it mean?