FAQs & Troubleshooting
![]() |
Popular |
127 Results
- 101How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 102How to use the Stitch in the Ditch Foot. (Optional accessory : SA191 / F065) [Video instructions]
- 103How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 104How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 105"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 106"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 107"This USB media is incompatible." message appears on the LCD. What does it mean?
- 108"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 109"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 110"USB media error" message appears on the LCD. What does it mean?
- 111"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 112"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 113"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 114"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 115"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 116"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 117"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 118"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 119"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 120"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 121"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 122"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 123"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 124"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 125Why is the outline sewing off the pattern?
- 126How do I sew buttonholes?
- 127Upper threading (Point)