FAQs & Troubleshooting
![]() |
Popular |
125 Results
- 51"This USB media is incompatible." message appears on the LCD. What does it mean?
- 52How do I clean the race?
- 53"Preventive maintenance is recommended" appears on the LCD.
- 54How do I specify the sewing end point with the sensor pen for utility stitches?
- 55"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 56"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 57"USB media error" message appears on the LCD. What does it mean?
- 58"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 59How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 60How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 61How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 62How do I remove or attach the presser foot holder?
- 63How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]
- 64"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
- 65How do I change the volume of operation sounds or alarm sounds?
- 66How do I specify the needle drop position using the sensor pen?
- 67How to specify the Guideline Marker Position With the Sensor Pen
- 68How do I attach the walking foot ?
- 69How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 70How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 71How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 72How do I wind the bobbin?
- 73"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 74"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 75"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 76"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 77"This file cannot be used." message appears on the LCD. What does it mean?
- 78"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 79"An invalid area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
- 80How do I specify the stitchiing width and stitch position using the sensor pen?
- 81About Sensor Function Area
- 82How do I calibrate the sensor pen?
- 83How do I thread my machine when using the twin needle mode ?
- 84How do I set the bobbin ?
- 85"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 86"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 87"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 88"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 89The thread tension is incorrect.
- 90How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 91Upper threading (Point)
- 92How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 93How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 94How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 95"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 96"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
- 97"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 98"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
- 99"The ending point cannot be selected for this stitch." message appears on the LCD. What does it mean?
- 100"Set the clock." message appears on the LCD. What does it mean?