FAQs & Troubleshooting
![]() |
Popular |
168 Results
- 51How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
- 52How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 53How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 54How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 55How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
- 56How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 57How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 58How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 59Though touching "OK" on "Attach vertical stitch alignment foot and edge sewing sheet" window, the same window still appears.
- 60Where do I put the oil in my machine?
- 61How do I thread my machine for use with the twin needle option?
- 62The "Pivot" key can not be selected.
- 63It is difficult to pass the thread through the needle bar thread guide(hook).
- 64The needle strikes the presser foot
- 65How do I recall a specific embroidery pattern from the computer?
- 66"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 67"OK to move the embroidery carriage to its original position?" message appears on the LCD. What does it mean?
- 68"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 69"Transmitting by USB" message appears on the LCD. What does it mean?
- 70"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 71"Select a pattern." message appears on the LCD. What does it mean?
- 72How to clean the bobbin case(pink marking or no marking) when using a prewound bobbin.
- 73When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 74The thread tension is incorrect.
- 75How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 76"Preventive maintenance is recommended" appears on the LCD.
- 77Embroidery
- 78Upper threading (Point)
- 79Place a spool of thread on a spool pin.
- 80How do I correctly install a bobbin?
- 81"Cannot recognize the embroidery positioning mark." message appears on the LCD. What does it mean?
- 82"There are no enough colors in the custom thread table, for the selected mode." message appears on the LCD. What does it mean?
- 83If the thread breaks during sewing.
- 84"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 85"OK to delete the selected picture?" message appears on the LCD. What does it mean?
- 86"Failed to save file." message appears on the LCD. What does it mean?
- 87How do I attach or remove the Embroidery Unit?
- 88How do I attach the walking foot ?
- 89Can I use twin needle with edge sewing?
- 90"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 91"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 92"OK to revert to previous color changes?" message appears on the LCD. What does it mean?
- 93"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
- 94"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 95"Remove the embroidery frame." message appears on the LCD. What does it mean?
- 96"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- 97"The needle is down. Press the needle position button to raise the needle." message appears on the LCD. What does it mean?
- 98"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 99"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 100"Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?