FAQs & Troubleshooting
![]() |
Popular |
103 Results
- 51"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 52How do I sew buttonholes?
- 53How do I sew such as vinyl, leather, quilting layers and velvet?
- 54F** or "F*" appears on the LCD. What does it mean?
- 55How do I thread the twin needle?
- 56"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 57"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
- 58"Finish editing the pattern before sewing the pattern." message appearing on the LCD. What does it mean?
- 59"Data volume is too large for this pattern." message appearing on the LCD. What does it mean?
- 60"Change to the single needle mode." appears on the LCD.
- 61"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 62Why does the upper thread keep breaking?
- 63Why does the lower thread keep breaking?
- 64Upper threading (Point)
- 65How do I correctly install a bobbin?
- 66How to use the Candlewicking Foot. (Optional accessory : SA193 / F068) [Video instructions]
- 67How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 68Upper Threading (Threading the upper thread)
- 69It is difficult to pass the thread through the needle bar thread guide(hook).
- 70"Deleting..." message appearing on the LCD. What does it mean?
- 71"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 72"OK to save the current settings?" message appearing on the LCD. What does it mean?
- 73"Saving..." message appearing on the LCD. What does it mean?
- 74"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 75"Selected a pattern." appears on the LCD.
- 76How do I clean the race?
- 77How do I sew an applique?
- 78How do I wind the bobbin?
- 79"Lower the presser foot lever." appears on the LCD.
- 80With free-motion quilting, skipped stitches or needle breakage occur
- 81"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 82"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 83"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 84"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 85"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 86"Twin needles can not be used for this pattern." appears on the LCD.
- 87"Lower the buttonhole lever." appears on the LCD.
- 88"Lift the buttonhole lever." appears on the LCD.
- 89The thread tension is incorrect.
- 90Why is the outline sewing off the pattern?
- 91How do I sew a blind hem?
- 92How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 93How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 94How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 95"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
- 96"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 97"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 98"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 99"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 100Why does my thread keep jamming?