Innov-is BQ3050
FAQs & Troubleshooting |
47 Results
Sort by
- 107/12/2024"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 207/12/2024"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 307/12/2024"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 407/09/2019"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 507/09/2019"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 607/09/2019"Set the clock." message appears on the LCD. What does it mean?
- 707/09/2019"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 807/09/2019"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 907/09/2019"This USB media is incompatible." message appears on the LCD. What does it mean?
- 1007/09/2019"This USB media cannot be used." message appears on the LCD. What does it mean?
- 1107/09/2019"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 1207/09/2019"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 1307/09/2019"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 1407/09/2019"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 1507/09/2019"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 1608/06/2018"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 1705/02/2018"This file cannot be used." message appears on the LCD. What does it mean?
- 1807/29/2016"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
- 1907/29/2016"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 2007/29/2016"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
- 2107/29/2016"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 2207/29/2016"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 2307/29/2016"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
- 2407/29/2016"The needle position cannot be changed for this stitch." message appears on the LCD. What does it mean?
- 2507/29/2016"The ending point cannot be selected for this stitch." message appears on the LCD. What does it mean?
- 2607/29/2016"Sensor module error." message appears on the LCD. What does it mean?
- 2707/29/2016"OK to delete the setting?" message appears on the LCD. What does it mean?
- 2807/29/2016"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 2907/29/2016"OK to delete the ending point setting?" message appears on the LCD. What does it mean?
- 3007/29/2016"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
- 3107/29/2016"Failed to save file." message appears on the LCD. What does it mean?
- 3207/29/2016"An invalid area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
- 3307/29/2016"An invalid sewing area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
- 3407/29/2016"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 3507/29/2016"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 3607/29/2016"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 3707/29/2016"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 3807/29/2016"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 3907/29/2016"Transmitting by USB" message appears on the LCD. What does it mean?
- 4007/29/2016"USB media error" message appears on the LCD. What does it mean?
- 4107/29/2016"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 4207/29/2016"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 4307/29/2016"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 4407/29/2016"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 4507/29/2016"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 4607/29/2016"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 4709/14/2012"Preventive maintenance is recommended" appears on the LCD.