Innov-is 950D
 |
FAQs & Troubleshooting |
28 Results
Sort by
- 105/20/2024F** or "F*" appears on the LCD. What does it mean?
- 207/02/2018"Disconnect the foot controller." message appearing on the LCD. What does it mean?
- 306/04/2018"Raise presser foot lever." message appearing on the LCD. What does it mean?
- 406/04/2018"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
- 506/04/2018"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
- 603/31/2016"Turn off the machine, and attach the embroidery unit." message appearing on the LCD. What does it mean?
- 703/31/2016"This embroidery card can not be used on this machine." message appearing on the LCD. What does it mean?
- 803/31/2016"Saving..." message appearing on the LCD. What does it mean?
- 903/31/2016"The bobbin thread is running out." message appearing on the LCD. What does it mean?
- 1003/31/2016"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
- 1103/31/2016"This button does not operate when the embroidery unit is attached." message appearing on the LCD. What does it mean?
- 1203/31/2016"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
- 1303/31/2016"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 1403/31/2016"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 1503/31/2016"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 1603/31/2016"Cannot sew on this screen." message appearing on the LCD. What does it mean?
- 1703/31/2016"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 1805/14/2015"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
- 1905/14/2015"Deleting..." message appearing on the LCD. What does it mean?
- 2005/14/2015"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
- 2105/14/2015"This pattern cannot be used." message appearing on the LCD. What does it mean?
- 2205/14/2015"OK to save the current settings?" message appearing on the LCD. What does it mean?
- 2305/14/2015"Selected a pattern." appears on the LCD.
- 2405/14/2015"Change to the single needle mode." appears on the LCD.
- 2504/07/2009"Lower the presser foot lever." appears on the LCD.
- 2604/07/2009"Lower the buttonhole lever." appears on the LCD.
- 2704/07/2009"Lift the buttonhole lever." appears on the LCD.
- 2804/07/2009"The safety device has been activated." appears on the LCD.
