TJ-4021TNR
 |
Veelgestelde vragen en probleemoplossing |
22 Resultaten
Sorteren op
- 113/12/2021How to adjust the cut position (For Windows)
- 213/12/2021How to set the Direct Thermal or Thermal Transfer Print Methods
- 310/12/2021How to execute the printer configuration (Self-test) to debug
- 410/12/2021How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
- 510/12/2021How to calibrate the Gap/Black Mark Sensor by directly operating the printer
- 601/12/2021How to calibrate the RFID
- 729/01/2021How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
- 829/01/2021How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
- 927/10/2020Printing the printer configuration (Self-test)
- 1024/06/2020An RFID error occurred.
- 1124/06/2020RFID calibration does not finish or fails. I cannot write RFID tags.
- 1224/06/2020The left or right side of the label is not printed correctly.
- 1324/06/2020The print quality is poor.
- 1420/02/2020When printing with the thermal transfer method, the print or cutting position gradually shifts.
- 1519/02/2020Printing is not possible.
- 1613/03/2019The printing position of small label is incorrect.
- 1713/03/2019How to skip the AUTO.BAS program only one time by directly operating the printer
- 1813/03/2019How to change the speed and density in BarTender
- 1913/03/2019How to change the printer code page
- 2013/03/2019How to adjust the tear position in BarTender
- 2113/03/2019How to adjust the printout position
- 2213/03/2019How to add a new stock from the Seagull driver
