When thread got tangled.

"Set the bobbin holder to the left." message appearing on the LCD. What does it mean and how do I clear it?

It is difficult to pass the thread through the needle bar thread guide(hook).

How do I create a space between characters?

How do I sew hook-and-loop fasteners(hook-and-loop tapes)?

"Can not read this disk. This disk may be defective." message appearing on the LCD. What does it mean and how do I clear it?

"There is no embroidery card in card slot. Insert an embroidery card." message appearing on the LCD. What does it mean and how do I clear it?

"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.

Why does the lower thread keep breaking?

Fabric and Thread

Where do I put the oil in my machine?

"Not enough available memory to save the pattern. Delete another pattern? Change the floppy disk?" message appearing on the LCD. What does it mean and how do I clear it?

"Deleting..." message appearing on the LCD. What does it mean?

"Can not save to this disk. The disk may be defective. Change the disk and try to save again." message appearing on the LCD. What does it mean and how do I clear it?

"Can not format this disk. This may be the wrong type of disk, or the disk may be defective. Please change the floppy disk." message appearing on the LCD. What does it mean and how do I clear it?

"This button does not operate when the embroidery unit is attached Turn off the power and remove the embroidery unit." message appearing on the LCD. What does it mean and how do I clear it?

"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?

"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?

"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.

How do I remove the presser foot holder?

The thread tension is incorrect.

Why is the outline sewing off the pattern?

Why does the needle keep breaking?

Embroidery

Place a spool of thread on a spool pin.

"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?

How do I thread my machine?

How do I wind the bobbin?

"Lower the presser foot lever." appears on the LCD.

"Saving..." message appearing on the LCD. What does it mean?

"Change to the medium or large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?

"Change to the large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?

"The pattern is too large for the large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?

"Select a pattern." message appearing on the LCD. What does it mean and how do I clear it?

"OK to save the current setting?" message appearing on the LCD. What does it mean and how do I clear it?

"Not enough available memory to save the pattern. Delete another pattern?" message appearing on the LCD. What does it mean and how do I clear it?

"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?

"Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?

"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?

"Raise presser foot lever." message appearing on the LCD. What does it mean?

How do I raise or lower the feed dogs?

Sometimes I insert a memory card or floppy disk, touch the appropriate icon, and the SG3000 screen blanks out, then turns back on. Sometimes the designs come up, but when I choose a design, the screen blanks out. Why is this?

How do I correctly install a bobbin?

"Formatting the floppy disk." message appearing on the LCD. What does it mean?

"There is a pattern included that can not be saved to a floppy disk. Save the pattern in the machine's memory." message appearing on the LCD. What does it mean and how do I clear it?

"There is not much thread remaining in the bobbin." message appearing on the LCD. What does it mean and how do I clear it?

"This disk is write protected. Can not delete the pattern. Disengage the write protection and try to delete again." message appearing on the LCD. What does it mean and how do I clear it?

"This disk is write protected. Can not save the pattern. Disengage the write protection and save again." message appearing on the LCD. What does it mean and how do I clear it?

"No disk inserted or this disk may be defective." message appearing on the LCD. What does it mean and how do I clear it?