FAQs & Troubleshooting
Popular |
94 Results
- 1How to set up the cap frame. [Video instructions]
- 2Color thread table
- 3How to select the "Eco Mode" or "Shutoff Support Mode" ?
- 4How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 5How to set up the cap frame driver. [Video instructions]
- 6How to Embroider on Bag. [Video instructions]
- 7How to Embroider on Shoes. [Video instructions]
- 8"This pattern cannot be used." message appears on the LCD. What does it mean?
- 9Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 10Maintenance (Oiling the machine)
- 11When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 12Embroidery pattern does not sew out correctly.
- 13How do I use the embroidery sheet ?
- 14Creating Beautiful Embroidery ( Hooping techniques )
- 15Colors of Tajima (.dst) embroidery data
- 16"Preventive maintenance is recommended" appears on the LCD.
- 17"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 18"Press the unlock key to unlock the machine." message appears on the LCD. What does it mean?
- 19The thread tension is incorrect.
- 20There is puckering in the fabric.
- 21The machine is noisy while embroidering.
- 22Loops appear on the surface of the fabric when embroidering.
- 23The bobbin thread breaks.
- 24"This USB media cannot be used." message appears on the LCD. What does it mean?
- 25"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 26Creating Beautiful Embroidery (Threads)
- 27How do I resume embroidering after turning off the machine ?
- 28How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 29What is DST ?
- 30How to Embroider on Pet Collar. [Video instructions]
- 31How to Embroider on Cap. [Video instructions]
- 32Maintenance (Cleaning the bobbin case)
- 33"Needle threader is in threading position." message appears on the LCD. What does it mean and how do I clear it?
- 34Stitches are skipped.
- 35Upper thread tightened up.
- 36"Trimming sensor error." message appears on the LCD. What does it mean?
- 37"This pattern cannot combine." message appears on the LCD. What does it mean?
- 38"This file cannot be used." message appears on the LCD. What does it mean?
- 39"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 40"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 41"OK to separate the combined border pattern?" message appears on the LCD. What does it mean?
- 42"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 43"Check upper and bobbin thread." message appears on the LCD. What does it mean and how do I clear it?
- 44"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 45"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 46How do I adjust the tension of the upper thread ?
- 47How do I embroider when I use fabric that cannot have stabilizer material affixed with an iron or adhesive?
- 48Maintenance (Clean the hook)
- 49"The USB media is write-protected so the data cannot be deleted. Cancel the write-protection before trying to delete the data." message appears on the LCD. What does it mean?
- 50The needle threader cannot be used.