FAQs & Troubleshooting
Popular |
166 Results
- 1How do I adjust the presser foot pressure?
- 2How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]
- 3Tutorial videos on how to use the machine [Video instructions]
- 4How do I attach the Embroidery foot “W+” with LED pointer or “W”?
- 5How do I attach or remove the Embroidery Unit?
- 6How to use the Cording Foot. (Optional accessory : SA110 / F013N, SA148 / F024N, SA157 / F019N, SA158 / F020N) [Video instructions]
- 7The machine stops and displays error message "Fabric edge is not recognized at this point" while edge sewing though the stitching is not reaching near the edge of the fabric.
- 8How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
- 9How do I attach or remove the embroidery frame ?
- 10How to use the Ruffler Foot. (Optional accessory : SA143 / F051) [Video instructions]
- 11How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 12How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 13How to use the Side Cutter. (Optional accessory : SA177 / F054) [Video instructions]
- 14"Preventive maintenance is recommended" appears on the LCD.
- 15Tips for sewing thin fabrics
- 16Tips for sewing thick fabrics
- 17"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 18How to use the Multi-purpose Screwdriver.
- 19"An invalid sewing area was touched by the sensor pen. Touch again within the valid sewing area." message appears on the LCD. What does it mean?
- 20How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 21How do I Play the Tutorial Video?
- 22How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 23How do I edit a single letter in the embroidery pattern?
- 24"Failed to save file." message appears on the LCD. What does it mean?
- 25How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 26How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 27How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 28How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
- 29How to use the Straight Stitch Foot. (Optional accessory : SA167 / F042N, SA108 / F011N) [Video instructions]
- 30How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
- 31How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 32How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 33"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 34"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 35How do I sew decorative stitching using yarn, etc.? (Zigzag Couching )
- 36How do I calibrate the setting of the camera needle position?
- 37"Make sure embroidery frame is moved as far back as possible. LOCK DOWN THE FRAME-SECURING LEVER." message appears on the LCD. What does it mean?
- 38"There are no enough colors in the custom thread table, for the selected mode." message appears on the LCD. What does it mean?
- 39"This function cannot be used while in the sensor mode." message appears on the LCD. What does it mean?
- 40"Move the sensor pen away from the currently marked position." message appears on the LCD. What does it mean?
- 41How do I remove or attach the presser foot ?
- 42How do I wind the bobbin?
- 43"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 44"The pattern is too large for the extra large embroidery frame." message appears on the LCD. What does it mean?
- 45"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
- 46How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
- 47How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 48The bobbin thread cannot be pulled up.
- 49The machine does not make stitches
- 50How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]