FAQs & Troubleshooting
![]() |
Popular |
236 Results
- 1How to Use the Thread Trimming Function. (Jump Stitch Trim)
- 2How do I adjust the presser foot pressure?
- 3Tips for sewing thick fabrics
- 4Tutorial videos on how to use the machine [Video instructions]
- 5How do I adjust thread tension for embroidering?
- 6How do I hoop the fabric in the embroidery frame?
- 7Introducing Brother My Stitch Monitor application
- 8Basic procedure to sew stitches
- 9How to adjust the thread tension
- 10Combination of fabric, thread and needle
- 11The embroidery data does not be recognized with the embroidery machine.
- 12How do I calibrate the setting of the camera needle position?
- 13Fabric puckers
- 14"The wireless LAN access point/router cannot be detected. " message appears on the LCD. What does it mean?
- 15Cannot thread the needle.
- 16Stitches are skipped
- 17How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 18Sewing result of buttonhole with the buttonhole foot A+ is not good.
- 19How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 20How do I attach the Embroidery foot "W"?
- 21How to attach the scanning frame. [My Design Center]
- 22Tips for sewing thin fabrics
- 23How do I adjust a stitch width or length?
- 24Embroidery
- 25The App shows the message "No Supported Machines Found".
- 26Needle breaks.
- 27The needle contacts the needle plate.
- 28How do I Play the MPEG-4 (MP4) Videos?
- 29How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 30How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]
- 31"The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine." message appears on the LCD. What does it mean?
- 32Using the embroidery needle plate cover
- 33How to use the sewing guide function.
- 34The fabric feeds in the opposite direction.
- 35The handwheel feels sluggish when it is turned.
- 36How to Create a Pattern with Line Scan. [My Design Center]
- 37Tutorial videos on how to use My Stitch Monitor with the machine [Video instructions]
- 38The embroidery design cannot be imported to the design page on PE-DESIGN 11 from the embroidery machine via the wireless network.
- 39The embroidery design data cannot be transferred from PE-DESIGN 11 to the embroidery machine via the wireless network.
- 40How to set up the wireless network connection with the wizard on the machine
- 41About the threads and the bobbin case when embroidering
- 42High-pitched sound while sewing
- 43How do I Play the Tutorial Video?
- 44How do I attach or remove the Embroidery Unit?
- 45How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 46How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 47How to link accounts
- 48How do I attach or remove the embroidery frame ?
- 49The pattern transferred from the Artspira app does not appear on the screen of the machine
- 50The wireless network connection cannot be set up between the embroidery machine and the computer with PE-DESIGN 11.