FAQs & Troubleshooting
Popular |
109 Results
- 1How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 2How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 3How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 4"Preventive maintenance is recommended" appears on the LCD.
- 5The machine does not make stitches
- 6How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 7How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 8"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 9How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 10How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
- 11How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 12"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
- 13"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 14"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 15"This file cannot be used." message appears on the LCD. What does it mean?
- 16"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 17How do I attach the walking foot ?
- 18"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 19"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 20"This USB media cannot be used." message appears on the LCD. What does it mean?
- 21"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 22How do I clean the race?
- 23"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 24"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 25"This USB media is incompatible." message appears on the LCD. What does it mean?
- 26"Transmitting by USB" message appears on the LCD. What does it mean?
- 27"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 28"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 29"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 30"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 31"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 32"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 33"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 34"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 35"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 36The bobbin thread cannot be pulled up.
- 37How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 38How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 39"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 40"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 41"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 42"Set the clock." message appears on the LCD. What does it mean?
- 43"OK to delete the setting?" message appears on the LCD. What does it mean?
- 44"Failed to save file." message appears on the LCD. What does it mean?
- 45How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 46How to use the Edge Joining Foot. (Optional accessory : SA184 / F056) [Video instructions]
- 47How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 48How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 49"In twin needle mode, the automatic needle threading button cannot be used." message appears on the LCD. What does it mean?
- 50"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?