FAQs & Troubleshooting
Popular |
109 Results
- 1Combination of fabric, thread and needle
- 2How do I clean the race?
- 3How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 4How to use the Binding Buttonhole Foot 1. (Optional accessory : SA105 / F083) [Video instructions]
- 5How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 6How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
- 7How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 8How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
- 9How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 10"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 11"Preventive maintenance is recommended" appears on the LCD.
- 12How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 13The bobbin thread cannot be pulled up.
- 14How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 15How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 16"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
- 17"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 18"This file cannot be used." message appears on the LCD. What does it mean?
- 19"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 20How do I change the volume of operation sounds or alarm sounds?
- 21How do I attach the walking foot ?
- 22Where do I put the oil in my machine?
- 23"This USB media is incompatible." message appears on the LCD. What does it mean?
- 24"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 25"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 26"This USB media cannot be used." message appears on the LCD. What does it mean?
- 27"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 28"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 29"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 30"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 31How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 32For better results when sewing stretch fabrics
- 33"This key cannot be used at this time." message appears on the LCD. What does it mean?
- 34"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 35"Set the clock." message appears on the LCD. What does it mean?
- 36"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 37"USB media error" message appears on the LCD. What does it mean?
- 38"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 39"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 40"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 41"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 42"Lower the buttonhole lever." message appears on the LCD. What does it mean?
- 43"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 44How do I sew a blind hem?
- 45The machine does not make stitches
- 46How to use the Needle Felting Foot. (Optional accessory : SA280/ NFAHS1) [Video instructions]
- 47How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 48"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 49"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 50"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?