FAQs & Troubleshooting
![]() |
Popular |
143 Results
- 51Tangled thread on wrong side of fabric
- 52How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]
- 53How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 54"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 55"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 56"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." message appears on the LCD. What does it mean?
- 57"Lower the presser foot lever." message appears on the LCD. What does it mean?
- 58"Not enough available memory to save the pattern. Delete another pattern?." message appears on the LCD. What does it mean?
- 59How do I raise or lower the feed dogs?
- 60How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 61How to change the needle stop position
- 62How to use the memory function to save embroidery patterns
- 63Tips for sewing leathers or vinyl fabrics.
- 64How to use the Binding Buttonhole Foot 2. (Optional accessory : SA111 / F084) [Video instructions]
- 65Bobbin thread does not wind neatly on the bobbin.
- 66The bobbin thread cannot be pulled up.
- 67Needle breaks.
- 68Bobbin thread breaks
- 69High-pitched sound while sewing
- 70Fabric does not feed through the machine.
- 71The needle contacts the needle plate.
- 72A broken needle has fallen into the machine.
- 73How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 74How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 75How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 76How do I retrieve stitch patterns saved in the machine's memory or a USB flash drive?
- 77Stitch Data Precautions (About the types of stitch data that can be used in the Character/Decorative Stitch memory)
- 78How to combine various stitch patterns in the Character and Decorative Stitch category
- 79How to make adjustments to character or decorative stitch patterns
- 80Tips for getting better embroidery results
- 81Tips for sewing thin fabrics
- 82"F07" appears on the LCD. What does it mean?
- 83"F06" appears on the LCD. What does it mean?
- 84"F05" appears on the LCD. What does it mean?
- 85"F03" appears on the LCD. What does it mean?
- 86"F02" appears on the LCD. What does it mean?
- 87"This pattern cannot be loaded as the pattern extends out of the editable area." message appears on the LCD. What does it mean?
- 88"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 89Winding and Installing the Bobbin [Video instructions]
- 90Upper threading [Video instructions]
- 91"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 92How do I restart embroidering if the thread breaks or the bobbin runs out of thread during embroidering?
- 93How do I sew with the twin needle?
- 94How do I adjust the sensitivity of the operation keys?
- 95"Not enough available memory to save." message appears on the LCD. What does it mean?
- 96"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 97"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
- 98"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 99How do I remove or attach the presser foot holder?
- 100"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?