FAQs & Troubleshooting
Popular |
125 Results
- 51How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
- 52How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
- 53How to use the Non Stick Foot. (Optional accessory : SA114 / F007N, SA122 / F008N) [Video instructions]
- 54How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 55"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 56Machine does not start to sew.
- 57"This pattern cannot be sewn with this mode." message appears on the LCD. What does it mean?
- 58How do I change the needle ?
- 59"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 60"Lower the buttonhole lever." message appears on the LCD. What does it mean and how do I clear it?
- 61"This pattern cannot be used." message appears on the LCD. What does it mean?
- 62How to use the Ruler Foot for Low Shank (Optional accessory : SA219 / F089 / F089AP) [Video instructions]
- 63How to use the Spanish Hemstitch Attachment (Optional accessory : SA220 / F090 / F090AP) [Video instructions]
- 64How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]
- 65How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 66How to use the Binding Buttonhole Foot 2. (Optional accessory : SA111 / F084) [Video instructions]
- 67Outline of viewing and functions for keys on the utility stitch screen and the decorative stitch screen
- 68"This pattern cannot be loaded as the pattern extends out of the editable area." message appears on the LCD. What does it mean?
- 69How do I adjust a stitch width or length?
- 70How do I enter a line feed in the embroidery pattern?
- 71"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 72How do I remove or attach the presser foot holder?
- 73"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 74How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
- 75How to use the Pearls and Sequins Foot. (Optional accessory : SA150 / F028N) [Video instructions]
- 76How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 77How to use the Gathering Foot. (Optional accessory : SA120 / F012N) [Video instructions]
- 78How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
- 79How to use the Clear-view Foot. (Optional accessory : SA145 / F023N, SA144 / F022N) [Video instructions]
- 80How to use the Picot Foot. (Optional accessory : SA164 / F039N, SA149 / F029N) [Video instructions]
- 81"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 82"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 83"F**" appears on the LCD. What does it mean?
- 84"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
- 85Tangled thread on wrong side of fabric
- 86When the thread became tangled under the bobbin winder seat
- 87How do I attach or remove the embroidery frame ?
- 88How do I thread the machine (Threading the upper thread)?
- 89How do I wind the bobbin?
- 90"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 91"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 92"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 93"Raise the buttonhole lever." message appears on the LCD. What does it mean?
- 94"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 95"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean and how do I clear it?
- 96The bobbin thread cannot be pulled up.
- 97Needle breaks.
- 98Upper thread breaks.
- 99Bobbin thread breaks
- 100Stitches are skipped